Results 1 to 3 of 3

Thread: 210mm 5.6 APO Symmar lens and Copal 1, and Graphex #2...

  1. #1

    210mm 5.6 APO Symmar lens and Copal 1, and Graphex #2...

    hello

    Two quick questions from a beginner today:

    1) after mounting the APO Symmar in the Pacemaker Speed Graphic, will the SG cover close--or, does the lens front prohibit complete closure of the cover?

    2) we have the 135mm 4.7 Graflex Optar in a Graphex #2--the back mounting ring is off, but is it possible to unscrew the front element from the shutter, or is some disassembly of the shutter required (we'd rather not force it). Does the rear element unscrew--or, is 'built in' (lack of better term) to the shutter somehow?

    thank you

    Dean Taylor

  2. #2
    Moderator
    Join Date
    Jan 2001
    Posts
    8,649

    Re: 210mm 5.6 APO Symmar lens and Copal 1, and Graphex #2...

    1) No, it's too big to allow the camera to close.

    2) The front and rear cells ("elements" are individual pieces of glass within the "cells") should both unscrew without disassembling the shutter itself.

  3. #3

    Join Date
    May 2010
    Location
    St. Louis, Mo.
    Posts
    3,064

    Re: 210mm 5.6 APO Symmar lens and Copal 1, and Graphex #2...

    I had the Caltar version of the Rodenstock Geronar 210mm f/6.8 lens and it just folded up in a Crown Graphic. The Geronar was an entry level lens with less elements and less coverage but with more than enough coverage for a Speed or Crown. They are plenty sharp stopped down too. Lately, I've seen a few of these lenses (Rodenstock and Caltar versions) sell for less than $100.00 on Ebay.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •