Results 1 to 4 of 4

Thread: DIY Possibly useful source of pre-made irises

  1. #1

    Join Date
    Apr 2014
    Location
    Central PA
    Posts
    478

    DIY Possibly useful source of pre-made irises

    Folks, I was back stage at the Whitaker Center in Harrisburg, PA last night, (my child's in a ballet this weekend) and saw a huge file cabinet of gels for fixing light colors and on the desk nearby a 3--4" diameter manual Iris (18 thin steel blades) for adjusting the stream of light coming out of a stage light. Looking at it got me to thinking of those of you who think of making your own lenses from loose elements and/or want to put an iris on larger projection lenses. I've built a couple sets of waterhouse stops from cardboard and sheets of plastic etc. because I, while I'm reasonably patient, I just couldn't see to making an iris and calibrating it. I asked one of the stage hands about this iris and they said that they thought they weren't too expensive 50-100$. I believe the key words are "source 4 iris." Hope this is helpful.

  2. #2

    Join Date
    May 2006
    Location
    grand rapids
    Posts
    3,835

    Re: DIY Possibly useful source of pre-made irises

    I've been using one for a variable burning tool in the darkroom for years. They're about $100. I work in the film industry and got mine for about $100 less than that from a damaged fixture that was being thrown away.

  3. #3
    DannL's Avatar
    Join Date
    Mar 2013
    Location
    OK, USA
    Posts
    283

    Re: DIY Possibly useful source of pre-made irises

    The largest lens I use is a Gundlach Radar f:4.5. The lens elements are set in a Betax No. 5 Shutter. It accepts a lens barrel that is 73mm in diameter, and the iris opens from 4mm to 55mm. I believe the Betax shutters are also available in smaller sizes. Just a thought.

  4. #4

    Join Date
    Aug 2013
    Location
    Chicago
    Posts
    1,430

    Re: DIY Possibly useful source of pre-made irises

    When I saw the pictures on the web I immediately thought !Universal lens mounting clamp!

Similar Threads

  1. DIY Film Processor for C41(Possibly E-6) under $100
    By Deval in forum Darkroom: Film, Processing & Printing
    Replies: 7
    Last Post: 26-Apr-2014, 07:54
  2. Possibly the best sheet film holder ever made
    By koh303 in forum Cameras & Camera Accessories
    Replies: 20
    Last Post: 12-Mar-2014, 09:41
  3. Name of this possibly urban landscape photographer?
    By icanthackit in forum On Photography
    Replies: 5
    Last Post: 7-Apr-2011, 04:30
  4. Possibly of interest
    By Dan Fromm in forum Lenses & Lens Accessories
    Replies: 0
    Last Post: 16-Feb-2009, 16:07
  5. Possibly of interest
    By Dan Fromm in forum Digital Hardware
    Replies: 1
    Last Post: 1-Jan-2008, 08:24

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •