I had the same thing happen to an old 8x10 holder of likely same manuf. mine looks glued. Will scrape or file off old glue and try jb weld since I have some. As noted it does run when heated to quick set. It will take household radiator temp just fine but will NOT work at tractor exhaust pipe temps. Tried both!
I know this is not 8x10, but most of my 4x5 holders have the metal edge riveted to the dark slide.
I am not sure of the sizes as these are really small, but this might be an option if you can find the correct size.
Short of that rough of the edges and 2 part epoxy.
Regards
Marty
+1 on 2 part. Occasionally I use Guerrilla, but it puffs out and clean-up set up has to be in place.
Les
The Duco cement is still tight. I've stopped being concerned about it. Thanks for all the advice!
"I would feel more optimistic about a bright future for man if he spent less time proving that he can outwit Nature and more time tasting her sweetness and respecting her seniority"---EB White
Posting Permissions
Reply With Quote
Bookmarks