Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: DIY 4x5 Wet Plate holder

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Unwitting Thread Killer Ari's Avatar
    Join Date
    Apr 2009
    Location
    Ottawa, Canada
    Posts
    4,950

    DIY 4x5 Wet Plate holder

    Hi all,

    I saw Alex's wonderful video about making one's own wet plate holder from an 8x10 film holder.



    I am about to embark upon making such a holder, but I intend to use a 4x5 holder to hold quarter-plate-size glass/aluminum.

    Just wondering if there are any extra precautions to take since I'll be working with a much smaller holder, or if anyone has any practical advice in general.

    I got me three new-ish Fidelity holders, they use a metal center septum instead of wood; I'm hoping by the time I'm done, I'll have one good, usable holder.

    Thanks in advance.

  2. #2
    Unwitting Thread Killer Ari's Avatar
    Join Date
    Apr 2009
    Location
    Ottawa, Canada
    Posts
    4,950

    Re: DIY 4x5 Wet Plate holder

    I just found Alex's description, with photos, of how to make a wet plate holder from a 4x5 holder.

    http://collodion-art.blogspot.ca/201...er-to-wet.html

    Thanks, Alex!

  3. #3
    Alex Timmermans
    Join Date
    May 2008
    Location
    Holland
    Posts
    560

    Re: DIY 4x5 Wet Plate holder

    Ari, be sure you take a more expensive 4x4 holder. There are two versions. One with a solid thick aluminium plate in the middle. That's the one you need. The cheaper version has two thin metal layers in the middle and that simply won't work with wet plate as it will collect a lot of dirt while using it.
    "You dont take a picture, it's given to you"

    www.alextimmermans.com
    www.collodion-art.blogspot.com
    email : collodion-art dot onsmail dot nl

  4. #4

    Join Date
    Jun 2015
    Location
    Anglesey, North Wales, UK
    Posts
    255

    Re: DIY 4x5 Wet Plate holder

    Quote Originally Posted by alex from holland View Post
    Ari, be sure you take a more expensive 4x4 holder. .
    Your description states" tape the inside which makes you able to mark the actual needed size. You can go up to 8.4 mm x 11,4mm " Should this be 8.4cm x 11.4cm (or 84mm x 114mm)?
    regards
    Tony

  5. #5
    Alex Timmermans
    Join Date
    May 2008
    Location
    Holland
    Posts
    560

    Re: DIY 4x5 Wet Plate holder

    You are right!
    "You dont take a picture, it's given to you"

    www.alextimmermans.com
    www.collodion-art.blogspot.com
    email : collodion-art dot onsmail dot nl

  6. #6
    Unwitting Thread Killer Ari's Avatar
    Join Date
    Apr 2009
    Location
    Ottawa, Canada
    Posts
    4,950

    Re: DIY 4x5 Wet Plate holder

    Alex, thank you very much for replying.

    I bought three Lisco Regal II holders, they seem to have one solid plate in the middle, as best as I can tell.
    There's no bend in the plate, and it is definitely not plastic.

    I really appreciate the work you've put into the blog, I've found it exceedingly helpful while I find my feet in the wet-plate world.

  7. #7

    Re: DIY 4x5 Wet Plate holder

    Thanks Alex for the teaching. On the 8x10 plate you used stainless steel wire and here you say to use 99.9 silver wire, here in Brazil I did not find the silver wire, can I use the stainless steel? Hug.

  8. #8
    Alex Timmermans
    Join Date
    May 2008
    Location
    Holland
    Posts
    560

    Re: DIY 4x5 Wet Plate holder

    Yes, no problem. Stainless will do the job
    "You dont take a picture, it's given to you"

    www.alextimmermans.com
    www.collodion-art.blogspot.com
    email : collodion-art dot onsmail dot nl

  9. #9

    Re: DIY 4x5 Wet Plate holder

    Quote Originally Posted by alex from holland View Post
    Yes, no problem. Stainless will do the job
    Thanks Alex.

  10. #10
    Mark Sawyer's Avatar
    Join Date
    Jul 2004
    Location
    Tucson, Arizona
    Posts
    5,108

    Re: DIY 4x5 Wet Plate holder

    Forget the tape, cut a plate the size of what you'll use, center it on the septum and mark the edges with a pencil.

    Don't cut from the corners. Drill a big hole in the middle of the line and cut into the corners. The divots left behind in the middle of each edge are handy for getting your fingertips under the plate to get it out.

    Avoid any little stray drips of epoxy when gluing the wires in. They'll always look like little wet drops of silver bath when cleaning out the holder between plates.

    Mark the rear darkslide on both sides so you don't mix up which side of the holder is which.

    Duct tape a little flap of mat board to an edge at the back to keep the plate from falling backwards it the holder:
    Attached Thumbnails Attached Thumbnails Holder s.jpg  
    "I love my Verito lens, but I always have to sharpen everything in Photoshop..."

Similar Threads

  1. Film/Plate Holder with Glass Pressure Plate
    By holmbāgu in forum Gear
    Replies: 17
    Last Post: 17-Jun-2011, 12:13

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •