Where can I find the screw driver for the little screw on the aperture scale on shutter? It is quite wide.
Where can I find the screw driver for the little screw on the aperture scale on shutter? It is quite wide.
Try McMaster-Carr Supply Co at www.mcmaster.com
They have a huge selection of screwdrivers.
You'll find the main link to them about 2/3 of the way down the main index page.
- Leigh
If you believe you can, or you believe you can't... you're right.
What size should I pick?
For the screwdrivers that I have, if the slot width matches, the width of the screwdriver head is much smaller than the screw head diameter.
The thickness of the blade is more critical than its width. If it fills the slot, it should work fine.
If possible, get a driver with the tip ground parallel.
These are often used for working on firearms, so you may find them called "gunsmith" screwdrivers.
- Leigh
If you believe you can, or you believe you can't... you're right.
Hardware stores and even some dollar stores have sets of jeweler's screwdrivers. The blades on many inexpensive screwdrivers are too thick, and have to be ground or filed down. As Leigh says, try to keep the flat sides of the blade as parallel as possible.
I have a set of Craftsman Precision screwdrivers----Check Sears and Roebuck. Wiha (German) also makes very fine precision screwdrivers. You can take your part to any good, real hardware store (not a big box) and they should be able to fix you up.
"I would feel more optimistic about a bright future for man if he spent less time proving that he can outwit Nature and more time tasting her sweetness and respecting her seniority"---EB White
I've gotten some nice Wiha screwdrivers from Micro-Tools, but they seem to be out of stock on most of the kits. You see what exists at their website, and shop for them elsewhere.
As Leigh mentions, McMaster-Carr has anything you want, and ships from New Jersey. You get your order the next day.
Charley
+1 on the Craftsman Precision Screwdrivers. I have a set of those. As I remember, there are four sizes of straight, Phillips and Torx. If you play with electronic stuff, inevitably you will need some little Torx drivers.Originally Posted by John Kasaian
I just ordered wiha screw driver with the hollow ground type. I hope the 1.5mm slot screwdriver to fit.
We use a set of Starret jewelers screw drivers.
Posting Permissions
Reply With Quote
Bookmarks