Electrical Specifications
The specified operating range for the Scanmaster 4500 is as follows:
110 Volt Systems (North America) l Low operating range: 90–132 VAC (47–63 Hz).
At a minimum, use a 10 amp circuit (the scanner draws up to 6 amps peak).
220 Volt Systems
High operating range: 180–264 VAC (47–63 Hz).
At a minimum, use a 5 amp circuit (the scanner draws up to 3 amps peak).
The Scanmaster 4500 is equipped with an autoranging power supply and requires a 3-prong grounded receptacle and common ground potential.
Note: It is recommended that your entire system be connected to an Uninterruptible Power Supply (UPS) or, at a minimum, plugged directly into surge-protected power strips.
Bookmarks