Results 1 to 2 of 2

Thread: Lens hood required when using large coverage lens on small format?

  1. #1

    Lens hood required when using large coverage lens on small format?

    I have heard that when using large coverage lenses, such as 400mm on a samller f ormats, say 4x5 or even 6x9, that a lens hood or compendium shade is necessary t o reduce the amount of light that is entering the camera, so that it is limited to an image circle slightly larger than the film being used. Supposedly all th is extra light that bounces around indside the camera causes loss of contrast an d sometimes creates some strange flare. The theory is, the inside of a bellows, does not absorb 100% of the extra light, so therefore the non absorbed rays bou nc around, allowing some to get on the film or interfere with the light rays bei ng absorbed by the film.

    Before I try to run some test shots of this, I was wondering if anyone has any experience with this. Of course if you are using lenses that are suited fo r a given format, than I guess this is not a problem. However, all my lenses wi ll cover 8x10 with plenty of movements, but I shoot mostly 4x5 and 6x9. Any inp ut would be appreciated.

  2. #2
    Robert A. Zeichner's Avatar
    Join Date
    Feb 1999
    Location
    Southfield, Michigan
    Posts
    1,118

    Lens hood required when using large coverage lens on small format?

    If the interior of the view camera in question is finished in matte black, as I would hope is the case, the only concern I would have would be avoiding lens flares caused by direct sun or specular highlights that strike the front element itself. This kind of flare comes from within the optics and can affect the contrast of what comes out the back end. The actual projection outside the minimum circle of coverage needed for the target in question should't contribute anything that would be easy to measure. Where this kind of problem is common, is when lenses from larger format cameras are adapted to be used on smaller hand cameras whose mirror box might contain reflective surfaces that lie just outside the image circle of lenses designed for that camera. This used to a problem in the motion picture business when folks were adapting 35mm still lenses for use on 16mm cameras.

    I have found that by shading the front of any lens I use with a piece of darkly colored card stock, I can observe just the right amount of shading necessary to keep oblique sun rays off the glass and avoid flares of any kind. I'm sure others prefer to use one of the many universal shades available to accomplish the same thing. I just hate to fiddle with more attachments when I'm busy trying to make an exposure.

    Here's an idea if your still concerned. Maybe you could set the camera up with the back removed and devise a cardboard baffle around the camera to create kind of a camera obscura set up. You could try creating some wild ass flares from the front and measure, with a light meter, the reflections off the bellows! I'm betting you won't measure much. The film you're using is probably far lighter in color than anything else in your camera. What do reflections off the film contribute to loss of contrast?

Similar Threads

  1. Lens hood of lens for 12x20 format
    By Johnny Eng in forum Cameras & Camera Accessories
    Replies: 2
    Last Post: 28-Feb-2006, 05:50
  2. Experiences moving from small to large format?
    By Eric_6227 in forum Cameras & Camera Accessories
    Replies: 22
    Last Post: 23-Jan-2006, 17:06
  3. large format lens coverage.
    By calbee in forum Cameras & Camera Accessories
    Replies: 20
    Last Post: 25-Jul-2004, 08:47
  4. Large lens/Small Board
    By scambug in forum Lenses & Lens Accessories
    Replies: 4
    Last Post: 10-Dec-2001, 22:03
  5. Massive image circle on small format, any problems with out lens shade?
    By Bill Glickman in forum Lenses & Lens Accessories
    Replies: 3
    Last Post: 14-Dec-1999, 17:37

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •