Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: enlarger durst laborator 1800

  1. #1
    fotógrafo antiguo
    Join Date
    Jan 2014
    Location
    Argentina
    Posts
    4

    enlarger durst laborator 1800

    Hi Everybody. I Just Got A DURST 1800 Enlarger. I Have One ProbleM, The Command Of The Enlarger That Moves The Table And The Head Of The Enlarger, Does Not Work Fine. Some Parts Of The Circuit Burn. I Do Not Have The Complete Maps Of The Circuit Of The Command (Stades lp3). This Cicuit Maps comEs With The Manual. Thanks A Lot. Alfredo.

  2. #2
    8x10, 5x7, 4x5, et al Leigh's Avatar
    Join Date
    Dec 2010
    Location
    Maryland, USA
    Posts
    5,020

    Re: enlarger durst laborator 1800

    Hi Alfredo, and welcome.

    Do not operate the unit until it has been repaired. Turning it on can damage other components.

    Most probably the electrolytic capacitors need to be replaced. These have a limited lifetime of about 20 years.

    - Leigh
    If you believe you can, or you believe you can't... you're right.

  3. #3
    fotógrafo antiguo
    Join Date
    Jan 2014
    Location
    Argentina
    Posts
    4

    Re: enlarger durst laborator 1800

    Quote Originally Posted by Leigh View Post
    Hi Alfredo, and welcome.

    Do not operate the unit until it has been repaired. Turning it on can damage other components.

    Most probably the electrolytic capacitors need to be replaced. These have a limited lifetime of about 20 years.

    - Leigh
    Thanks.
    But my doubt are not the components to be repared, I need the circuits maps that comes with the manual. Is there a chance you could get that for me. Thank you very much. Alfredo.

  4. #4
    8x10, 5x7, 4x5, et al Leigh's Avatar
    Join Date
    Dec 2010
    Location
    Maryland, USA
    Posts
    5,020

    Re: enlarger durst laborator 1800

    Hi Alfredo,

    I'm sorry, but I do not have any documentation on that enlarger.

    However, any competent electronic technician should be able to repair this without a circuit diagram.

    - Leigh
    If you believe you can, or you believe you can't... you're right.

  5. #5
    fotógrafo antiguo
    Join Date
    Jan 2014
    Location
    Argentina
    Posts
    4

    Re: enlarger durst laborator 1800

    Quote Originally Posted by Leigh View Post
    Hi Alfredo,

    I'm sorry, but I do not have any documentation on that enlarger.

    However, any competent electronic technician should be able to repair this without a circuit diagram.

    - Leigh
    Thanks anyways.
    Yes I know, but without the map it takes 20 times more time and ís more risky.
    Do you have a clue how to get that map? Thanks.

  6. #6

    Join Date
    Jul 2011
    Posts
    7

    Re: enlarger durst laborator 1800

    Hello everyone, I too have a Durst 1800 with color head CLS 2000, unfortunately I have a faulty stabilizer EST 2000, and I can not find the wiring diagram or parts anywhere in the world ....

    Someone could help me?

    The circuit diagrams of these machines should be available because the manufacturer does not provide any assistance now.

    thanks

  7. #7
    ic-racer's Avatar
    Join Date
    Feb 2007
    Posts
    4,753

    Re: enlarger durst laborator 1800

    Durst Pro USA is providing a replacement power supply for the CLS 2000.

    The schematic of the EST2000 is too large for me to post here. I could e-mail it to you.

  8. #8

    Join Date
    Jul 2011
    Posts
    7

    Re: enlarger durst laborator 1800

    Quote Originally Posted by ic-racer View Post
    Durst Pro USA is providing a replacement power supply for the CLS 2000.

    The schematic of the EST2000 is too large for me to post here. I could e-mail it to you.

    wow, you have the wiring diagram??

    I send you now my mail, I thank you infinitely!

    The Durst USA has a EST2000 that I would sell at $ 1500, unfortunately the shipment in Italy with duty, would cost me a figure too high and that I can not afford ...

    I hope I can receive your wiring diagram soon, thanks again

  9. #9
    resurgance's Avatar
    Join Date
    Jun 2013
    Location
    Nelson, New Zealand
    Posts
    73

    Re: enlarger durst laborator 1800

    Hi there IC-Racer, are you able to supply me wiring diagram for EST2000? Can you or anyone clarify exactly what this box does, power supply for lamps, relay for shutter, fancy times plugs maybe? I do not have one, I am from afar trying to assist with fixing one, so as to procure another 8x10 enlarger the gentleman owns.
    Thanks

  10. #10

    Re: enlarger durst laborator 1800

    Can you read German?

    EST2000 German manual

Similar Threads

  1. Rejuvenating old enlarger - Durst 138s Laborator
    By vizion in forum Darkroom: Film, Processing & Printing
    Replies: 1
    Last Post: 25-May-2010, 07:10
  2. Durst L1200 Laborator enlarger wanted to buy
    By Ron Spencer in forum Darkroom: Equipment
    Replies: 3
    Last Post: 4-Oct-2005, 19:45
  3. Durst L1200 Laborator enlarger - disassembling
    By Ron Spencer in forum Darkroom: Equipment
    Replies: 4
    Last Post: 2-Oct-2005, 19:01
  4. Durst Laborator 138 Enlarger
    By David Lucas in forum Darkroom: Film, Processing & Printing
    Replies: 3
    Last Post: 20-Oct-2004, 15:25

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •