Page 3 of 3 FirstFirst 123
Results 21 to 27 of 27

Thread: Hermagis Serial numbers Need your help with a database

  1. #21

    Join Date
    Jul 2013
    Location
    Queensland, Australia
    Posts
    225

    Re: Hermagis Serial numbers Need your help with a database

    Hi Steven, thankyou for the info on my lens 18635 Convertible Petzval, it has (15 & 30-80) inscribed on the element opposite Hermagis oi' Paris if that helps

  2. #22

    Join Date
    Jan 2009
    Location
    Denmark
    Posts
    5,190

    Re: Hermagis Serial numbers Need your help with a database

    I will adding a new one soon. Thanks for yours too, Andrew!!

    I'll start a new list soon based on the other digit markings (Typically, xxxxx. xxxx - xxx). I think it must have something to do with the model/size/focal length - so it may be without a solution unless we are very lucky. For instance, data from two identical lenses.

  3. #23

    Join Date
    Jan 2009
    Location
    Denmark
    Posts
    5,190

    Re: Hermagis Serial numbers Need your help with a database

    I have updated the Hermagis serial number list. Post #20.

    There are some surprising gaps, apart from the Franco-Prussian conflict period.


    I have now looked at the pre serial number engraving Hermagis Plain Petzval which looks absolutely kosher.
    The engraving and position is exactly the same as 7274, just without the serial number. The lens edges are signed Hermagis and there is a single clue "12 cent".

    A bit off the theme in this thread, it has a special front insert for the lens hood for washer stops. With velvet seals inside the lens hood. Most of these must have been thrown away when they were converted to WHS.
    Attached Thumbnails Attached Thumbnails image.jpeg   image.jpeg   image.jpeg   image.jpeg  

  4. #24
    Alex Timmermans
    Join Date
    May 2008
    Location
    Holland
    Posts
    558

    Re: Hermagis Serial numbers Need your help with a database

    Thank Steven for all tbe work!!

    Regarding to your new Hermagis.
    Are you sure it's something originally made by Hermagis?
    I have never seen it before.
    "You dont take a picture, it's given to you"

    www.alextimmermans.com
    www.collodion-art.blogspot.com
    email : collodion-art dot onsmail dot nl

  5. #25

    Join Date
    Jan 2009
    Location
    Denmark
    Posts
    5,190

    Re: Hermagis Serial numbers Need your help with a database

    Quote Originally Posted by alex from holland View Post
    Thank Steven for all tbe work!!

    Regarding to your new Hermagis.
    Are you sure it's something originally made by Hermagis?
    I have never seen it before.
    I am absolutely certain.

    The internal fitting washer stop holder is obviously professionally made and fits perfectly in the brass hood.
    Hermagis were mostly busy with their patent "double ended" convertible at this time (say, 1856-1860) and production of "normal" Petzvals was quite small.

    If you look at page 6 in P et P, you will see a selection of these simple Petzvals. None are particularly early except "3,670" - which I am convinced is a misreading of 8,670! Mine is an exact match for size 7, both focal length and diameter of the lens (61mm). No lens hood washer units are shown, but this could almost be expected as they all have WHS, except 9,305.

    It is not a unique system - the generous seller (a member here!) has a much bigger Hermagis with exactly the same insert!

    I thought I would show the barrel engraving found on the very early Hermagis Convertibles. One is shown in the P et P booklet. Mine is a little earlier and they found time enough to write the Parisienne address. Unlike many other Paris makers, Hermagis didn't often mention their address!

    Note the twin screws holding the end of the rack. These are repeated at the other end of the barrel.

    One important date is known about early Hermagis production - the date of the converible patent was July 1856. The two earliest convertibles registered in this thread have this patent engraved, which means they must be after this date. My gut feeling is that the patent date coincides with the start of serial number engraving on sleeves and barrels. Lens marking came much later.
    Attached Thumbnails Attached Thumbnails image.jpeg  
    Last edited by Steven Tribe; 27-Jun-2017 at 14:08.

  6. #26

    Join Date
    Jan 2009
    Location
    Denmark
    Posts
    5,190

    Re: Hermagis Serial numbers Need your help with a database

    This one

    http://www.ebay.co.uk/itm/BIG-BRASS-...vip=true&rt=nc

    could be an early Hermagis serial no. 4307.

    The rear and front cells have been assembled wrongly.

    I base my case on:

    - the very heavy duty rack is cut away near the lens cells. This identical in appearance to the earliest Hermagis I have.

    - the use of double screws to secure the rack to the barrel at both ends. I have only ever seen this on early Hermagis lenses.

    - the general appearance is not in conflict with Hermagis early brass.

    - The lens diameter is 81 mm which matches one of Hermagis standard Petzval sizes.

    - marking the barrel, rather than the sleeve, was done in connection with "monture universelle". The hood assembly, which would shed light on this, is unfortunately absent.

    - the serial number is a number which is realistic considering the "known" numbers.

    What does the glass edge writing say.

    It is, unfortunately, not my purchase!

    I don't believe this ever sold as a Hermagis. The rough numbering and the slightly out of true rack screws suggest it might have been a construction attempt that never found its way out of the workshop for retail sale.
    -
    Last edited by Steven Tribe; 22-Jul-2017 at 08:12.

  7. #27

    Join Date
    Jan 2009
    Location
    Denmark
    Posts
    5,190

    Re: Hermagis Serial numbers Need your help with a database

    Quote Originally Posted by alex from holland View Post

    Regarding to your new Hermagis.
    Are you sure it's something originally made by Hermagis?
    I have never seen it before.
    This was the deep brass insert in the lens hood which had room for different washer stops.

    There is a Lerebours listed (July 2017) which has exactly the same system. Quite a lot smarter than the heavy pillbox system. Given up quite quickly as WH stops became universal!

Similar Threads

  1. Pinkham Smith Serial numbers and model numbers
    By Amedeus in forum Lenses & Lens Accessories
    Replies: 10
    Last Post: 15-Sep-2014, 20:45
  2. Dallmeyer serial numbers
    By glyphoscope in forum Lenses & Lens Accessories
    Replies: 11
    Last Post: 4-Feb-2014, 14:55
  3. Dallmeyer serial numbers
    By glyphoscope in forum Cameras & Camera Accessories
    Replies: 2
    Last Post: 24-Jul-2013, 01:52
  4. Wollensak serial numbers again
    By Dan Fromm in forum Lenses & Lens Accessories
    Replies: 6
    Last Post: 22-Feb-2013, 07:47
  5. Jobo Serial Numbers
    By laroygreen in forum Darkroom: Equipment
    Replies: 2
    Last Post: 25-Apr-2011, 11:06

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •