Results 1 to 7 of 7

Thread: Avoiding Vignetting with Lens of Limited Coverage

  1. #1

    Avoiding Vignetting with Lens of Limited Coverage

    I have an older Fujinon 75mm lens with very limited angle of coverage. Often in using the lens with extreme front tilt I get some vignetting. I understand why and to compensate I'll often lower the lens. With the Lee Filters this is diff icult to do since the camera bed often interferes with filter movements (split N D). My question is will the use of the back tilts cause less vignetting than th e front standard?

  2. #2

    Join Date
    Jan 1999

    Avoiding Vignetting with Lens of Limited Coverage

    Back tilts will cause not just less, but rather absolutely no vignetting if there is no vignetting in the zero position.

  3. #3

    Join Date
    Sep 1998

    Avoiding Vignetting with Lens of Limited Coverage

    Back tilts or swings may cause severe cutoff.

    Or they may cause no cutoff.

    It depends on what type of tilts and swings your camera has.

    Optical axis movements = no cutoff or very minimal ones.

    Base movements = extreme cutoff problems.

    The same applies to the front.

  4. #4

    Join Date
    May 1998

    Avoiding Vignetting with Lens of Limited Coverage

    With great respect to Bob, who probably knows much more about this that I do, can I challenge that last statement, "The same applies to the front".

    Assume a lens only just covers a 4x5 film.

    If I tilt the back, on axis, I won't get any vignetting.

    If I tilt the front, on axis, the light cone will tilt, and I will get vignetting.

    Am I missing something?

  5. #5

    Join Date
    Jun 1998

    Avoiding Vignetting with Lens of Limited Coverage

    Also with due respect for Bob and for his active participation in these forums, tilting or swinging the back on axis or with base tilts will not move the film outside the cone of light. Rear rise or fall, of course, could cause vignetting.

    The largest problem with back movements is distortion if the movement is too great.

    A little front and a little back movement is an excellent solution, keeping distortion down and front movement to a minimum.

  6. #6
    Robert A. Zeichner's Avatar
    Join Date
    Feb 1999
    Southfield, Michigan

    Avoiding Vignetting with Lens of Limited Coverage

    Have you ever noticed some ground glass corners are cut off? The purpose for this is to allow one to sight through to the taking aperture of the lens before making an exposure. If you can see the entire taking aperture, you'll get no vignetting. The use of rear tilts and swings will actually reduce the target area for the lens effectively increasing the lens' coverage. Rear movements tend to exagerate the perspective a bit, but sometimes, depending on the subject matter this can hardly be noticed or it can actually be a benefit. Best of luck P.S. how do you like your Lee filters?

  7. #7

    Avoiding Vignetting with Lens of Limited Coverage

    And if avoiding vignetting is not possible try over composing the shot and printing just what you want of the image. In other words, "back up!"

Similar Threads

  1. Best 8x10 field lens 4 close ups w limited bellows
    By Frank Petronio in forum Cameras & Camera Accessories
    Replies: 12
    Last Post: 26-Dec-2005, 09:35
  2. Limited edition, not really that limited ?
    By QT Luong in forum Business
    Replies: 34
    Last Post: 19-Oct-2005, 16:45
  3. vignetting on prints w/150 enlarging lens
    By brian steinberger in forum Darkroom: Film, Processing & Printing
    Replies: 9
    Last Post: 13-Oct-2005, 08:27
  4. Avoiding lens flare
    By Tom_4210 in forum Style & Technique
    Replies: 29
    Last Post: 12-Mar-2005, 19:17
  5. Replies: 1
    Last Post: 14-May-2001, 07:39


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts