Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Lens Flange Damage: How to un-bend?

  1. #1

    Join Date
    Aug 2006
    Location
    Fortuna, California
    Posts
    23

    Lens Flange Damage: How to un-bend?

    Hello, I am sure that many in this forum have experienced an accidential mishap whereby your precious lens slipped and fell only to to damage to the front element flange. I did not drop my lens but had received it in this "damaged" condition from shipment just recently. Contributing factors were rough handling by DHL/ USPS and inadequate protection in packageing. The damage will now prevent a filter to be screwed onto the flange to go in front of the front lens element. Has anyone of you attempted to "un-bend" a dented-in flange successfully and do so without damage to the filter threads or the front lens element? Is there a professional source out there that can "fix" the problem? Any suggestions would be most greatly appreciated. Thanks.

  2. #2

    Join Date
    Nov 2008
    Posts
    182

    Re: Lens Flange Damage: How to un-bend?

    IIRC, SK Grimes does this type of repair. You may be able to reshape it using a piece of wood and tapping on it with a small hammer.

  3. #3
    8x10, 5x7, 4x5, et al Leigh's Avatar
    Join Date
    Dec 2010
    Location
    Maryland, USA
    Posts
    5,454

    Re: Lens Flange Damage: How to un-bend?

    There is a special tool made for this purpose.
    Click image for larger version. 

Name:	lv1.jpg 
Views:	17 
Size:	9.1 KB 
ID:	98500
    Micro-Tools sells it, but they're currently out of stock. http://www.micro-tools.com/store/P-L...Ring-Vise.aspx

    Any camera repair shop should have one.

    - Leigh
    If you believe you can, or you believe you can't... you're right.

  4. #4
    Out of Plumb
    Join Date
    Nov 2010
    Location
    Fort Worth, TX USA
    Posts
    160

    Re: Lens Flange Damage: How to un-bend?

    Googled "Lens Filter Ring Vise " and found lots to choose from.
    Paul Ward

    First real camera: Nikon F2, gift from gandfather (1980), still have and use it.
    Wista m45 4x5
    Calumet Green Monster
    Agfa 8x10 Field Camera

    “A big negative is really a positive…”

  5. #5
    Name: ______William Booth
    Join Date
    Feb 2012
    Location
    Alabama, USA
    Posts
    195

    Re: Lens Flange Damage: How to un-bend?

    eBay has them for cheap from a number of sellers.

  6. #6

    Join Date
    Feb 2009
    Location
    Chicago, IL
    Posts
    222

    Re: Lens Flange Damage: How to un-bend?

    It’s not an elegant solution, but I have used a wood anvil and punch to pound out the dent in a filter ring on an Olympus Pen FT lens. I first cut a curved depression, the same diameter as the outside of the filter ring, in a piece of ¾” oak. I then cut a positive curve, the same diameter as the inside of the ring, on the end of a 1” x ¼” x about 6” piece of oak. I positioned the lens in the first piece and tapped the dent out using the second piece as the punch.

    Bob

  7. #7

    Join Date
    Feb 2001
    Location
    Greenbank, WA
    Posts
    2,605

    Re: Lens Flange Damage: How to un-bend?

    Go slowly, the material can be very brittle.

  8. #8

    Join Date
    Feb 2004
    Location
    Arnprior, Ontario, Canada
    Posts
    328

    Re: Lens Flange Damage: How to un-bend?

    The ring vise does a great job but I always put a piece of thin rubber over the jaws to minimize marring.

  9. #9

    Join Date
    Aug 2006
    Location
    Fortuna, California
    Posts
    23

    Re: Lens Flange Damage: How to un-bend?

    Thank you all for the great suggestions. It is so nice to have the resources and experience of all of you that have responded in this forum. To all of you my dearest appreciation.
    All the best,
    Joe

  10. #10

    Join Date
    Aug 2006
    Location
    Fortuna, California
    Posts
    23

    Re: Lens Flange Damage: How to un-bend?

    Thank you Leigh for that lead. I assume the tool will not damage the very fine metal threads.

Similar Threads

  1. Who Can Repair Lens Filter Ring Damage?
    By RedSun in forum Cameras & Camera Accessories
    Replies: 24
    Last Post: 9-Sep-2014, 06:38
  2. Damage to lens cement in hot car
    By Bill_1856 in forum Lenses & Lens Accessories
    Replies: 9
    Last Post: 26-Jul-2007, 16:39
  3. Lens damage: what the hell is that?
    By alec4444 in forum Lenses & Lens Accessories
    Replies: 16
    Last Post: 20-Feb-2007, 13:58
  4. Lens coating damage
    By Steve Clark in forum Lenses & Lens Accessories
    Replies: 7
    Last Post: 29-Jan-2005, 20:00
  5. Lens coating damage
    By Huw Evans in forum Lenses & Lens Accessories
    Replies: 7
    Last Post: 11-May-2001, 13:51

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •