Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: building a camera case

  1. #1

    building a camera case

    I want to build a carrying case for my 7 x 17 korona. I am not a wood worker and have a very simple plan. Thin plywood air-nailed using triangular strips inside for strength. Common hinges, latches, and foam. I would like to find corner hardware and angle trim. I have seen corner hardware on many types of cases but have no idea where to find it! Matching angle trim would be nice, but not necessary.

  2. #2

    Join Date
    Jun 2002
    Posts
    9,487

    building a camera case

    Lee Valley sells nice hardware, although it is not cheap. I found blocks of high density (not crumbling) foam for kayaks at the local canoe/kayak shop - it's probably the best for cmaera cradles, etc.

    A little glue plus air nails will double the strength of nails alone. Get really good Baltic Birch plywood from a lumber specialists, not Home Depot. You could go thinner and lighter with the better plywood. Also hobby shops sell "aircraft" plywood for thin (1/8th) sheets for dividers and such. You can wrap the dividers with medium weight foam (from a craft supply.)

    Microtools also sells foam.

    I converted an Igloo cooler and epoxied foam and plywood to the interior. Might save a lot of hard work and keep your camera cool and incognito too!

  3. #3

    building a camera case

    Phil,

    If your mean the kind of bumper hardware I have seen in smaller form (brass) in ACO hardware stores and of course the net will locate anything if you search hard enough, but really I'd skip the hardware.

    I too am an avid woodworker and ULF photographer. I have found that padding works better than armor when it comes to protecting cameras and it is a whole lot lighter. Styrofoam coolers are great. Line/laminate them with cloth or plastic to keep the little bits together and you are golden. This is for transport only. I store my cameras in natural cloth only as many, many plastics outgas which can't be good. In low risk transport situations (my own car) they are inside a backpack wrapped in a blanket. Smaller cameras (medium format) go into soft-sided coolers.

    I have built wooden cases for other photographers and have tried them for myself and am convinced that they are not practical. If you are not convinced and wish to build one, I recommend you use angle-aluminum (found in many local hardware stores and building material stores) for reinforcement. I use that in my camera construction now.

    Cheers, .

  4. #4

    Join Date
    Oct 2003
    Location
    Westport Island, Maine
    Posts
    1,236

    building a camera case

    Other woodworking catalogs, like Woodcraft and Rockler carry the corner hardware, hinges, handles, etc. that you're looking for. They all have web sites, but the catalogs may be easier to use for comparisons and browsing. Nothing against Lee Valley, though; they're excellent.

    I agree with the Baltic Birch plyood idea. I haven't looked at Home Depot, so I can't comment except to say that for the value of the camera, it's worth paying a little more to make sure you have the best, strongest materials for a case.

    Good luck! I started doing small projects like yours. Now I make furniture and cabinets in a custom-designed workshop building with all the big, dangerous toys. It can be as addictive as photography!
    Bruce Barlow
    author of "Finely Focused" and "Exercises in Photographic Composition"
    www.brucewbarlow.com

  5. #5

    Join Date
    Sep 2003
    Location
    South Carolina
    Posts
    5,506

    building a camera case

    Phil,

    Let me suggest an alternative approach. Just buy yourself a medium size piece of luggage with rollers, the kind you see many people pulling through airports. One that has an overall length of about 26-27" will work fine for carrying your Korona. For protection on the bottom and top cut out two pieces of masonite (use the kind that has holes to save on weight), one that fits the bottom of the luggage, and another that can be slipped into the zip around net that is typically. Glue a piece of black felt to the piece that goes on the bottom. To use, put your camera, together with things such as lenses (in cushioned pouches), meter, dark cloth, etc. on the bottom, put a piece of thin high density foam over the camera, and the film holders on top of that. Depending on type of bag you should be able to fit our Korona and two or three holders inside the bag, and another couple of holders in the long outside zip compartment.

    This makes a better carrying case than a plywood case, in my opinion, and involves virtually no work on your part.
    For discussion and information about carbon transfer please visit the carbon group at groups.io
    [url]https://groups.io/g/carbon

  6. #6

    building a camera case

    nails are really a bad woodworking practice. Screws and wood glue are much better except for a few applications.

  7. #7

    Join Date
    Apr 2000
    Posts
    166

    building a camera case

    A 7x17 Korona happens to fit perfectly in the kind of hard case designed to carry a 4x5 monorail camera. Just remove the two partitions that catch the rail. You can pay a lot for a high-tech model from LightWare, etc, or find an old aluminum-clad wood box for practically nothing. Camera with mounted lens, holders, focus hood, and a couple extra lenses fit easily.---Carl

  8. #8
    Moderator Ralph Barker's Avatar
    Join Date
    Sep 1998
    Location
    Rio Rancho, NM
    Posts
    5,034

    building a camera case

    Ah, the old view-camera case conundrum. Do I go practical? Tactical? Or, do I want a case with a style befitting that of the camera itself?

    For sheer practicality, the luggage or cooler suggestions are probably the easiest to implement. Either can provide good physical protection, and are available with wheels. The lid closures on most coolers, however, tend to be sub-standard, and might need to be supplemented. A bit of nylon strapping and quick-release closures, such as that used on back packs, can do the trick. Places like REI (Recreational Equipment Inc.) sell the parts and strapping material in several sizes.

    For a more "tactical" approach, the commercial cases from Pelikan and others provide even more protection, and can be tightly padded such that the camera can survive airline baggage handlers. An alternative to these cases would be military electronic equipment cases that can be found at military surplus stores. These latter cases usually have superior latching arrangements, are usually air-tight (often with pressure-equalization valves), and are usually tough enough to parachute out of airplanes.

    For style, however, probably nothing beats a well-designed "cabinet-grade" wooden case. As others have suggested, shun the "construction-grade" plywood available at the home-improvement stores, and go for the better plywood from specialty lumber and hobby stores. The individual plys are much thinner, and there are no internal voids as there are with construction-grade plywood. My suggestion here would be to think in terms of a reasonably sturdy wood frame, covered in as thin a "skin" as possible to minimize weight. The traditional brass corner plates are really for the protection of the case, not the contents. Similarly, the skin is more for containment, rather than real protection. As Ronald mentioned, however, nails are not the ideal fastener for this type of item - glued and screwed is the better approach.

    Personally, I have this vision of a chopped-and-channeled (remember those '50s hot rods?) steamer-trunk style case, made from fine woods and veneers, complete with the traditional curved, convex lid, and brass hardware. Perhaps even hidden wheels for on-pavement transport, and a hidden extendable handle. The perfect compliment to a wooden camera, and the wooden tripod over the shoulder. Of course, one would have to wear antique clothing when walking around with such a case. ;-)

  9. #9

    Join Date
    Sep 2003
    Posts
    538

    building a camera case

    You already have excellent suggestions for hardware.

    But finding the proper foam may present a problem. There are many kinds, some too soft, too delicate, or with a very short life before chemical decomposition begins. And the selection sold by upholstery shops in medium-size cities is meager.

    I have had excellent results from this on-line supplier. The site Help Button gives much useful advice about various types of foam materials.

    http://www.foamonline.com/

  10. #10

    Join Date
    Jun 2002
    Posts
    9,487

    building a camera case

    Just another two cents. I just bought a Lightware view camera case on eBay for $150. Prior to that I had a Tenba view camera case that cost $200. New prices for these cases are more than double. They are fancier than what you ultimately need, but they do work very well. The soft sides prevent dings on walls and doors - something the hard cases do all too often. The professional Tenba and Lightware cases are lighter, keep the contents cooler, and really are the best solution - you can check them on airlines with a rack of lenses and all your stuff - by the time you mess around, these are probably the best and most economical solution.

    But I do fancy seeing a picture of Ralph in his antique clothing

Similar Threads

  1. What plans for building camera?
    By Artie_1832 in forum Cameras & Camera Accessories
    Replies: 5
    Last Post: 17-Oct-2015, 23:10
  2. Building a darkroom for a camera club
    By Øyvind Dahle in forum Darkroom: Film, Processing & Printing
    Replies: 4
    Last Post: 27-Nov-2003, 15:18
  3. Building a 12 in x 12 in camera
    By Lawrence Floyd, Jr. in forum Cameras & Camera Accessories
    Replies: 13
    Last Post: 18-May-2002, 10:55

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •