Results 1 to 6 of 6

Thread: Why do lenses stop down so far?

  1. #1

    Join Date
    Jan 2004
    Location
    Halifax, Nova Scotia
    Posts
    444

    Why do lenses stop down so far?

    I just purchased a lens in a barrel mount that stops down to f/180. It is a 240mm APO Ronar. Why would anyone use settings that small? Would diffraction be horrible long before then? I have heard of people using f/64 when they are contact printing, but f/190 seems rediculous.

  2. #2
    Yes, but why? David R Munson's Avatar
    Join Date
    Jul 1999
    Location
    Saitama, Japan
    Posts
    1,494

    Why do lenses stop down so far?

    Sometimes the situation means that nothing else will work. I've shot some still life when the only stop that would work was AWD - all the way down. As far as it would go, past the last marked f-stop. Diffraction was there, but not as bad as I was expecting.

  3. #3

    Join Date
    Aug 2000
    Location
    France
    Posts
    151

    Why do lenses stop down so far?

    Edward,

    on 8x10 with an admittable COF (Circle of Confusion) of 0.2mm (standard: format diagonal / 1500), the limiting aperture would be f300(!). The optimum aperture for 8x10 (i.e. where DOF and sharpness are the best compromize) is f120 for 8x10. Between f120 and f300, DOF is getting larger, but overall sharpness is reduced. Beyond f300, diffraction would be larger than COF.

    The standard COF is of course an anachronism. But even with higher demands and a COF of 0.1mm, the limiting aperture would be f150. So f90 is not rediculous at all, even for 4x5 and not-so-high demands.

    The real problem is, that you usually need more DOF for macro work and "macro" is reached fast on 8x10. The effective aperture is two stops less than dialed at 1:1.

  4. #4

    Why do lenses stop down so far?

    Edward, another way to put it is to calculate the resolution limit as imposed by diffraction for different f-stops.

    Here are the approximate values I use:

    f22 : 64 lpm (line pairs per mm)

    f32 : 45

    f45 : 32

    f64 : 22

    f90 : 16

    f128 : 11

    etc.

    Note that for sake of clarity, the approximate values simply are the f-stops values in reverse order. You just have to remember one to know them all.
    Assuming the eye can see about 5 lpm at a 25cm viewing distance (or 2,5 lpm at 50cm, etc.) it is easy to determine how big your print can be. For example at f128 for viewing at 50 cm : 11 divided by 2,5 equals about 4, so you can enlarge your original 4 times - which makes a big print if you're working in 8x10!

    Marc

  5. #5

    Why do lenses stop down so far?

    I forgot one thing: The f-stops in my calculation are the effective f-stops, that means that they are corrected for bellows draw.

  6. #6
    Whatever David A. Goldfarb's Avatar
    Join Date
    Mar 2000
    Location
    Honolulu, Hawai'i
    Posts
    4,658

    Why do lenses stop down so far?

    Those small f/stops are usually found on process lenses not intended for conventional pictorial photography. I would guess that for that kind of work, there are applications where diffraction is not a big issue.

Similar Threads

  1. Apo-Grandagon & f-stop
    By Emre Yildirim in forum Lenses & Lens Accessories
    Replies: 13
    Last Post: 3-Mar-2006, 00:47
  2. f/stop differences between 4x5 and 8x10 lenses
    By Dan_5988 in forum Cameras & Camera Accessories
    Replies: 2
    Last Post: 8-Jan-2006, 12:23
  3. f/stop timing and partial stop calculation
    By scott jones in forum Darkroom: Film, Processing & Printing
    Replies: 12
    Last Post: 30-Jan-2002, 12:54
  4. To stop or not to stop
    By josh_560 in forum Darkroom: Film, Processing & Printing
    Replies: 12
    Last Post: 28-May-2000, 06:13
  5. How to set f-stop with lenses in barrels?
    By Ron Whitaker in forum Lenses & Lens Accessories
    Replies: 2
    Last Post: 23-Mar-2000, 12:14

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •