Where can I find a replacement light for the Zone VI 5x7 enlarger? It needs the lamp and the average costs? Thanks Brian
Where can I find a replacement light for the Zone VI 5x7 enlarger? It needs the lamp and the average costs? Thanks Brian
Have you tried Calumet?
http://www.calumetphoto.com/eng/services/repairs.cfm
Maybe this company can help. Does a lot with Omega but also claims to offer a custom service.
http://www.modernenlargerlamps.com/Welcome.html
Hello Brian,
Did you ever figure out a solution for replacing the cold light head on the 5x7 enlarger? I just purchased a Zone VI 5x7 enlarger, Type II, and wonder what I will ever do if the bulb dies. I took a peek in the head tonight and it sure does not look like there is an easy way to replace the bulb. I could not find any markings for the type of bulb, but perhaps I missed it. Does anybody know if a replacement bulb is available somewhere?
Here is a look inside the headL
As an aside, the person who assembled head used three bolts that are too short so it is extremely difficult to bolt the head back together. I don't know how they assembled it in the first place. I gave up in frustration and need to buy three longer bolts to make it right.
Larry
Hi
I have a Z6 enlarger type 1, a few months ago the blue tube packed up so I decided that given my location I would never be able to source a replacement, great shame but I have removed the Z6 from my darkroom and replaced it with a UK made Devere 504, I still have the Z6 in storage and if you are interested I could remove the green grid if it would be of interest to you or any other forum member, the shipping cost could be prohibitive but if I packed very carefully there is a good chance that it would arrive in good working order.
Other parts available are 4x5 6x6 and 35mm neg carriers, compensating timer etc.
Find some one that does neon lights. the blue is Volatrarc's veep blue and the green is Veep green glass tubes.
Richard T Ritter
www.lg4mat.net
As Voltarc now merged with Light Sources group as Aristo, maybe ask Mrs Kessler (her email here http://www.light-sources.com/specialty/products/aristo) if they can do remplacement lamps for ZoneVI units, they offer already theses similar 2 color lamps for the Aristo VCL8100. As they didn't sell anymore complete units, maybe they will accept to do others brands too. They will need the unit or a dimensional drawing. See this Aristo topic http://www.largeformatphotography.in...T12-1212-D1414 for more info.
My Lumen project http://ginetteclement.com
Thanks for the information, I have sent Ms.Kessler an email but I'm sure it wouldn't hurt for others to chime in.
Larry
Digisnaps of VC head.
Jpeg #1 showing the inside of the VC head after removal of the diffuser assembly.
Jpeg #2 showing 1 of 5 posts which screw into the 5 holes visible in Jpeg #1
Jpeg #3 shows the front of the grid assembly after removal.
The grids are held on to the backing plate with one wire at each corner and silicon sealant.
Jpeg #4 shows the back of the grid assembly.
Further digisnaps and info to follow.
Bookmarks