While researching front standard mods i really didn't find much info so i figured i would share mine with a few pic
Ask questions if you like. Parts list include angle aluminum from tractor supply,1/4x28 bolt,stainless screws and a cambo front standard.
In this pic above you see the bolt and an aluminum block and nut from the cambo.
In this next pic what you dont see is that i hot put hot glue in the cutout then screwed the block into the glued wood.
The glue was used to fill the voids to help add stability and keep everything in place.
Nice to see. Great idea and thanks for showing this. It is nice to know for future projects.
I need to do a little more as far as making it a little better looking. Also for the front extension to fold the rear standard hangs off the back slightly. I want to build a new bottom block that would be a little longer and still allow a rear extension if i ever find one cheap enough.
It's not a looker but that's all the movements you'd ever need.
-Chris
Great solution! Thanks for posting it.
+1.Originally Posted by Jim Fitzgerald
Lachlan.
You miss 100% of the shots you never take. -- Wayne Gretzky
Now looking for a cambo front standard... My Korona is the black finish from the factory. This would look and work like it was made that way...Thanks, Bill
Posting Permissions
Reply With Quote
Bookmarks