I agree with Ari. With your film probably not being any bigger than 4X5, you would be HARD press to tell the difference between Non-Oil Mounted scan versus an Oil Mounted scan.
If you are...
Type: Posts; User: Evanjoe610; Keyword(s):
I agree with Ari. With your film probably not being any bigger than 4X5, you would be HARD press to tell the difference between Non-Oil Mounted scan versus an Oil Mounted scan.
If you are...
Jim,
Congratulations on you IQSmart2 scanner. Michael Streeter is a True Gem of a Gentleman. I use an Eversmart Pro II on 2.6.3 for now. However i WOULD had not confine the scanner to a very tight...
Hi Bob,
I have to run both scanner as INDIVIDUAL scanners with different OS.
Both scanners has different means of achieving its final mode.
The Creo/Scitex is able to pull out of the...
Nagairaj,
I will check to see if I have it loaded on my Backup Drive.
What is your current computer setup?
Do you plan to run it in SCSI mode or you have any of the Firewire to SCSI...
Sandy & Ari,
I have OS 9.2.2 loaded on my Three (3) G4 MMD DUal Processors. No problem. I also have all maxed out with the maximum RAM. Check to see how old your HD is, as the HD might be why you...
Hi Jim and Ari,
The IQSmart mask are slightly different in its pin registration over the Eversmart Pro mask.
You might want to ask Michael Streeter for a plain mask or a Pre-Cut Assorted Mask....
You need the last version of Jazz + Software. Version 3.5.1
I had and gave it to Michael, when I sold my two working Jazz +. Great workhorse!
Currently using EverSmart Pro II with Ratoc FRS1X...
You would have to be a Business entity in order to take available of this Free Download.
My personal account was disabled by Kodak as they told me I was using it for personal use, although I...
Kamran,
I believe that the IQSmart & Eversmart software are DIFFERENT Software written for each respective scanner.
Please contact michael Streeter of Genesis Equipment for IQSmart software...
Hi Kamran,
Did you ever get your software/If not please contact Michael Streete of Genesis Equipment. He will be able to help you out with software.
Hi Luke,
Are you using 2.51 OR 3.5.1 on OSX?
3.5.1 is the very last version for the Jazz series.
The Jazz + is a far better scanner than the plain Jazz.
On par with the Eversmart Pro...
The recommended SCSI card is the Adaptec 2906. Just make sure that your system can run 32bit and 64 bit.
I'm trying to run my Imacon Precision II/III on a Dell Precision 690 Workstation.
Of...
Larry,
I would recommend for a New scanner. That way you do not have to deal with any legacy issues.
I suggest the large format Epson scanner...
...
Kevin,
What went wrong your Scitex scanner that died? Which model is it? Bare minimum would be Jazz + followed by the Jazz.
The Jazz + is in the same league as the Eversmart scanner (2540 DPI)...
Hi Kevin,
Please see my posting to Baitsbite,
I haven't been on for a loong while.. I will check my Backup HD for the software and if I still have it, I will burn a copy for you and Baitsbite.
Hi Baitsbite(?)
I haven't been on the forum in a loong while.... Medical condition is challenge to wake up every morning.
I think I should have the software on one of my many backup HD. I...
Chelsea was part of the photographic movement in the downtown area. Near the waterfront as many of lower Manhattan was, Chelsea had old turn of the century piers and warehouse. As a teenager growing...
Discontinued software should be available on Hasselblad's website.
Bump your hardware up to at least Tiger OS10.4.1.1 on a SCSI connection. Seamless without a hitch. You will be able to received...
Good Morning Kevin,
Its been awhile since I had my hands on my Jazz & JAZZ +. Of the two scanners, both are identical, with the JAZZ + the better scanner.
The messages you received are as...
ScannerFan or whomever your name is,
Which IQSmart are you looking at ? In the IQ line, there were 3 scanners: IQ1, IQ2, or IQ3
If its within the Eversmart class, it would be the Supreme II.
...
Its getting harder and harder to find good working older G4. Hence my personal reason to get as late as possible. Starting from the DP 1.0 GHZ processor and up. Not much of a choice, but then again...
H Surf,
As far as I remember for the Eversmart Pro II and any scanners that was still on SCSI, depending on the last software version that Scitex put out that allowed SCSI to be use was on...
Surf,
I'm interested to know what setup you're currently on, that allows you to run SCSI mode on V2.6.0.
What is your OS version you are running on?
Which computer setup (PowerPC G4 or...
Hi Michael,
That SCSI to Firewire adapter you mention, 2Wave Technologies adapter p/n 102400-1, is that available from a company?
I thought that it was the original unit Scitex placed into their...
Randy,
You got a point there. Some of the BEST prints I saw over the years come from Master Darkroom enthusiasts. Bleaching & Zoning along with platinum printing has NOT been touched yet by the...
Lenny,
Thank You for the update Information on Aztek support of the 4500, 7500, 8000 and Premier models. I used to operate a Crosfield drum scanner and a Hell scanner. I also operated a med-range...
Hi Lenny,
Been following this thread for awhile and I'm also on another thread on the Rangefinder Forum. I 'm seeing some fantastic scans coming off a Scanview Scanmate SM11000 scanner.
Who...
Heads Up Folks. It appears that Kodak will sell the two imaging business that contains the commerical imaging group.
Lets hope that it will help revive the Scanners again.
...
Ni Hao Chen Xinghe,
Check with Genesis Equipment Marketing in Arizona.
Here is their website:
http://www.genesis-equipment.com/contact.aspx
Ask for Michael Streeter.
I think that the...
So Hasselblsd moved again. The previous location was on New Road in Parsippany, NJ. I see that the new information for them is:
Hasselblad Bron Inc | 1080A Garden State Road, Union,NJ 07083 |...
Hi Richard,
I'm a bit surprise to hear that your call went unanswered by Hasselblad USA. Your incident, I'm hoping is simply one that slipped through the crack, as my encounter (usually in ...
Hi Richard,
Sorry, I should had read what you wrote more carefully! I saw the Precision III designation, so I assume that you had the bundled Firewire adapter that was sold with the upgrade kit...
Richard,
I'm hoping that Chris is still there. He is a young guy who is savvy with the Ratoc and the various OS out there in either Windows or Apple.
As long as you have a Ratoc FRS1X Firewire...
Richard,
Who did you speak with at Hasselblad? Are you located in New Jersey within driving distance?
If not, ASK and SPEAK in person with either:
Chris Moore
Hasselblad Technical Support
...
I think that in the First version of OSX (Jaguar?) you can run the Eversmart Jazz+ in Expert Mode. The first version of OSX recognizes both the FireWire Setup and SCSI. You could run Jaguar off a G4....
Sandy,
That's good to regarding a Second glass. Would the original glass that is currently on the scanner, be consider as a second glass for the Oil Mounting Kit? Or should it be an actual...
Hi Sandy,
What is a fair price for one to pay for the SCITEX/CREO Oil Mounting Kit?
I will be visiting one of my friend who is liquidating his PrePress shop and he has some leftover items for...
Richard,
I would like to second your opinion of Bob Watkins too. I used Bob to overhaul my Mamiya 645 system before I gave it to my niece. He is a gentleman and quite knowledgeable with various...
Georgl,
No, I don't recall any e-mail messages form you regarding a calibration slide. I have but just one calibration slide and it came with my Pro II when I bought it.
If you are in need to...
Georgl,
The offer from Juergen for OXYgen 2.6.0 will work for you.
To Juergen: It appears that your version of OXYgen is for the Eversmart line of scanners. Does it say EVERSMART on the DVD...