Search:

Developed with HC110 very old maybe 8 years at least DIL H Invert for first 5 secs then 5 inversions very 30 sec temp @ 68.2, I now have a visible negative, I used Kodak stop bath then TF-5 for 6...

4 x 5 developing in a job 2336 manually 1000ml solution243022

fa 1027 was feb 27 2021 Pyro HD was just recent never used until now I will try some HC110

shutter works no rebate lettering

Hi,

I have some expired TMAX 100 since 2013 and thought I would try it. I exposed 3 negatives, one at 64 and 2 at 100. I developed 2 in PyroCat HD 10 ml A to 10 ML B to 900 ML distilled, plain...

I have a Colorgetter 3 Pro and it is makin a loud beep noise. The beep noise just started after 5 min after turning the machine on. I did shut it off and restart, but the beep came back on at start...

Does anyone know if a stop bath is needed for FA-1027? If so , what type and how long?

The Globuscope 4x5 with the 65mm f8 works for me.

Plus 1 on Custom Bellows, I have used them for my medium format folder cameras. They are excellent.

Could someone post the types of chemicals with possibly links. I would like to give it a try myself, but I am having a hard time trying to figure out what chemicals to get, times for processing, and...

Hi, it's a ColorGetter 3 Pro I just had the Xenon bulb replaced. I am using ColorRight 5.2 software on a Mac G 3. I am reading the manual trying to figure out where the proper connections are. I...

When ever I make a drum scan of a 4x5 at 4000 dpi or higher I tend to get these banding lines. It doesn't appear on any of my scans at 2000 dpi. The first pic is a scan of a B&W film. I also noticed...

Hi,

I am new to scanning and I was able to get my scanner going via some help from Bruce Watson and others. I would like to know if I am scanning my transparencies correctly.

1. The...

Hey Bruce,

Just to let you know I might have the scanner going. Instead of booting in OSX and going into OS9 via classic, I changed the boot up to OS 9.2.1 on the eagle 1 drive. The GPIB card got...

Here are the pictures

125644
125645
125646

If it gets this far, it should display a message on the control panel that says it's ready. At this point you can press the drum door open switch and open the door and either pull the drum out, or...

Hey Bruce,

I do have ColorRight 5.2 and disks labeled scanner drivers.

I was able to get the scanner going like you mentioned above. When I start CG 5.2 the Apple goes into Mac OS 9.2 and then...

I think I might have ColorRight Pro 2.0 on the computer. I will take a pic of the monitor screen tomorrow and post.
I am Running the Dell 333 s/l with the powermac G3, it has 2 usb ports in the...

Hey Bruce,

The problem was the floppy drive, it wasn't reading the diskette. I replaced it and it worked, so far. The only thing I can't do right now is scan because I think the dongle is not...

Here are some more pictures

125267 125268 125269 125270

I have another disk that says, "ColorGetter 3, Controller Software Version 5.3.4 P/N 38482-301 Rev D." I don't know if I should boot with...

Hi,

I am new to drum scanning and this is my first time using a drum scanner. Here are some questions that I have.


1. Do I connect the apple keyboard to the dongle on the back of the Mac. I...

Hey, thanks guys. I removed the epson scan software from the control panel and then reinstalled. Problem solved.

Hi,

I have a PC with Windows 7 64 bit and I tried to scan my film but the Epson scan won't allow me to click on film and either will Vuescan. This is the first time it hasn't worked for me. I...

Manistique Michigan

Hi, those are good. There is a guy on ebay that does drum scans if you want to try it out. I have a epson 4990 with the variable height holder and I have my holder high over the glass. I think about...

Upper Penninsula Michigan, Globuscope 4x5, 65mm JML F8, Fuji Velvia 50, scanned epson 4990, processed in photoshop.
89203

Thanks for the help. To make sure I am doing this right, here is a picture of the negative, a scan from the epson 4990 using vuescan. It is a jpg from the scanner, no adjustments. The PMK Pyro I...

Tmax 100 @ iso 80, Developed with Legacy Pro Developer with Jobo, 9 mins at 71F.


81645

Fuji Acros 100 Rated @iso100 developed in PMK Pyro 10mins at 70F
Scanned on Epson 4990 scanner with...

Thanks guys, but the instructions have the acros rated at iso 50 for 14 mins. I did 10 mins @ 70F, manually with no jobo and it appear the negs turned out fine. Some of the shadow areas were black.

Hi,

I have been searching the forums and internet and I cannot find a solid time to develop my Fuji Acros rated @ 100 iso with my Jobo Cpe2. I was planning on 10 mins, speed number 2 with PMK...

I have two different processing times for Kodak T-Max 100 Professional 4x5 sheets in a Jobo Processor. For example one page I downloaded states a time to develop Tmax 100 in Tmax RS 1:9@ 75F for 12...

I would suggest a professional drum scan. Do a search on ebay. I paid 40.00, and it was worth it. I was in the same situation as you. I compared the drum scan to my Epson scan using the better...

Taken with Globuscope 4x5, with 65 JML, Tmax 100 developed with D 76 1:1 @ 72 Degress, 10 Mins. I don't know why I got the light marks. Film has been sitting in the holder for over 6 months, maybe...

Some test images with Globuscope 4x5, with 65 JML. Tmax 100 developed in D76 1:1, 10 mins in Jobo.
...

I found it on Google search. Past articles, Sandy King recommended it. I typed in Pryor HD 100 tmax, I read that Pyro isn't recommended for tmax 100. I shot all film at box speed, ISO 100. I am...

Hi, I was planning on purchasing the Pyrocat HD pr the Pyrocat HD with Glycol and using it to develop my TMAX 100 and Fuji Acros 100, 4x5 films. Is the recommend 9 mins 36 secs @71 degrees, a good...

Here is the link

http://finance.yahoo.com/news/Kodak-shares-plunge-as-apf-977189236.html?x=0&sec=topStories&pos=6&asset=&ccode=

I would say the sinar or cambo is the ticket. You can also try wooden field camera, shen hao, tachihara for lightness, these are more for field work.

I like provia 100 for slide and kodak ektar 100 for c41

Thanks for the help guys,looking at speed graphics right now. Someone just bought a sinar back off of ebay I was eyeing for $100 US. I was also contemplating buying a wista or toyo back. someone did...