Andrew, when I removed my retaining ring for the front element, I just used thumb pressure to turn it (thumbs 180 degrees apart). If that doesn't work, get a wide elastic band and use it as a...
Type: Posts; User: Kevin Klazek; Keyword(s):
Andrew, when I removed my retaining ring for the front element, I just used thumb pressure to turn it (thumbs 180 degrees apart). If that doesn't work, get a wide elastic band and use it as a...
Andrew I was planning on some testing of EI's. What is a good starting time? I will be using a slosher frame in an open tray. As noted Sandy's chart indicates 6M (if I read that correctly) but that...
A lot of great info that confirms I will give it a try. Thanks to all! To get things started for N development, in a tray using a slosher rack, at 70F, for silver printing, how does the following...
I am a long time user of HC110 (Dil H) with FP4. I use slosher trays for 5x7 and 8x10 with a semi stand method. I am thinking of trying the pyrocat due to all the positive comments on this combo. I...
Your advice was right on Mark. My lens must be in good shape as the lens retaining ring screwed off very smoothly. Once off I could see the TINY set screw, which also screwed out easily. I took the...
Thanks for the pics and explanation Mark. How did you get that front retaining ring off? What tool did you use?
Kevin
Thanks Mark. Looks like I had it all wrong. The results were good with my focus and set approach. I will reshoot some shots I just did with the set and focus approach to see the difference with the...
I am just getting around to working with my 12 inch Velostigmat Series II 4.5 lens with the diffusion ring. In trying to find the proper use of the ring I find conflicting results. An old Wollensak...
Per their web page, the Chamonix 5x7 (maple) is 4.6 pounds with the convertable back and 4 pounds with the horizontal only back.
Sorry, It was Nate Gray who posted the instructions. Too early in the morning:o
Kevin
Wally, I had a similar problem in that my dial was loose and I fixed it myself. It took about an hour but if I had to do it again it would take about half that time. If you have some basic mechanical...
Flo, the camera looks like a Japanese built unit, perhaps a Nagaoka??? Measure the recessed area that the lensboard fits into in mm to determine if the board is a Linhof size. It should be around...
As noted the 410 head is a joy to use so I accept that it adds weight high up contributing to the tippy factor. I think it works very well with the 3342. Robert notes he uses an anchoring system. I...
I also have the Feisol 3342 with a Manfrotto 410 head. I am using this combo with my 6 1/2 pound Dorff 5x7. Other than being a bit top heavy the setup works very well. You have to be more careful on...
I have been dealing with Ken for a few years, but strictly for parts. All of my dealings have been positive...money sent...parts shipped. I have spoken to him a few times on the phone and he was...
I have a Schneider Symmar-S 135 5.6 lens including the lensboard in the for sale section. Check it out. Despite the Schneideritis (which as far as I can tell makes no difference in results) the lens...
Harold, I have a 12 in Velo with the diffusion ring. You should see the numbers 0 to 5 on the front ring. When facing the front of the lens, you turn it counter clockwise to move from 0 to 1 to 2...
Rob, as usual, this was a great gathering. Lots of new people and some familiar faces. Gerry was excellent in explaining his techniques and he certainly removed a lot of the mystery in the process....
Well, actually a fly reel case, but it holds my Fuji 240, 300 and 450 on 4x4 boards perfectly. The case is padded and has 3 movable dividers in it. All for the sum of $19.99. I know this concept is...
My 135 Symmar-S has a 51mm front (SN223/24) and 40.5mm back (SN223/18 slip on Schneider caps. You should be able to order them from B&H.
Kevin
Indeed the Gepe Professional is a long throw (21mm) release. I had to get one for my Betax 5 shutter and it works with room to spare. Expensive, but it was the only cable release I could find with...
The water is moving, but v-e-r-y slowly. Spring morning, Smoke Creek, Algonquin Park, 210 Symmar-S, Dorff 5x7, FP4.
I have been away from the computer the last few days so the response is a bit late. Bruce, the splitters are in the camera back, not in the film holder. There are slots around the inside of the back...
Using a splitter is very easy to do ( I have a 5x8 and a 4x10 splitter with my Dorff). The hardest part is remembering which half of the film you have exposed and which side of the holder you used....
Four 5x8 shots with one 8x10 holder is done with splitters in the camera back.The splitter creates a 5x8 opening on half the film. By moving the splitter and rotating the back you can expose the...
I carry my V8 Dorff, and Fuji 240A, 300C and 450C plus pentax spot in a Lowepro Computrekker AW. I sling 3 or 4 holders in a laptop shoulder bag, then carry or sling my Berlebach pod. The Fuji lens...
Thanks for the gift Bruce. The CD arrived last week (no Canada Post issues) and I had quick look at it. Looks like you added A LOT of illustrations. I look forward to plowing through it again and I...
John you have to remove the shaft and pinion to braze it unless you want to turn your dorff to ashes!!! I silver soldered my, which involves a propane plumbers torch and heating the metal to quite...
John, I rebuilt a V8 about a year ago. The pictures you show look like someone made a repair to the pinion gear that moves the rear turntable forward. Factory soldering of the pinions to the rods is...
This is my Deardorff 8x10 that I rebuilt last year.
Kev, I have been shooting 8x10 for a little over a year now. The view is spectacular through the big glass. The contact prints are also spectacular in their own way, even at an 8x10 size. I only...
As a Deardorff owner, I can highly recommend them. Remember the camera is just a box to position a lens and a sheet of film. You can't go wrong with any of your choices as all will do what they are...
bb, yes you have found the right part from bhp. I also attach it with 3 clicks so that the film is not pinched. You can feel and hear the clicks so it is easily repeatable. Gentle motion when...
There are two reasons for the problem you have. First, you seem to be missing a part. There is a film retaining clip piece that fits on the top of the film rack that holds the film in place. Second,...
I have a Symmar-S 210 and it just covers 8X10 with no movements. It covers much better on 5x7 and 4x5. I do not have a g-claron 210, but others on this form indicate it covers 8x10 when stopped down...
One of my resolutions for 2008 is to start learning Pl/Pd printing. One of my first projects is to build a UV light source. I have found a store that sells 18 inch black light fixtures and bulbs (BLB...
Rob, it sounds like a great workshop. Does the cost include materials used in the session or is there an additional fee for that?
Kevin
Sandy if you look at Rob's picture above, that is pretty much what to expect. Check http://www.algonquinpark.on.ca/ for details on the park and current weather. It can get VERY cold at times so dress...
Sounds great Rob. Nothing better than Algonquin in the winter (well maybe the summer, fall, or spring!!!). I will plan to meet up with you that weekend for some 8x10 fun in the snow.
Kevin
I have the 3002 model and use it for 4x5, 5x7 and 8x10. It is overkill for the 4x5 and handles the 8x10 with ease. Rock solid. This model has no center column so that saves a bit of weight. I agree...