Search:

Swiss watches and chocolate. :)

If you do decide to use the Swiss Travel System, you'd save a lot by buying the Swiss Pass or a Swiss Half Fare Pass.

For film you can buy them from Photostudio13, they're located near the main...

My condolences to you and your family Amy.

RIP Ted. Many thanks for all you've done for the LF community.

Ditto Franks response.

A lot of the gigantic diasec works are hung this way.

Cheers,

Edwin

Would anyone know the dimensions of the Ebony Wide Angle Fresnel (4x5)? I've recently acquired a 55mm Apo-Grandagon and it's a pain to focus with the BosScreen. I'm thinking the ebony fresnel would...

David,

I agree with the excellent sources posted by the other members above. Another one would be Ott & Wyss for Jobo stuff and Tetenal chemicals.

Welcome to Switzerland.

What application would you be using the lens for?

Gilles Larrain did a series with the American Ballet Theater using a Sinar 4x5 with the Expolux system.

PPS: http://www.pps-imaging.de/ they have branches all over germany.

Photostudio 13 has a branch in stuttgart: http://www.photostudio13.de/

Good to know that Ars Imago can order it. They're very helpful people and been my supplier of choice since I started LF.

Cheers,

Edwin.

Sorry missed the color part of your first post.

Checked with my other suppliers too, no stock of anything bigger than 4x5. :(

You can check with photostudio13.ch if they have any 13x18 porta...

Here's some on stock at ars-imago. Btw, I have no connection to them, it just a place where I buy my film and darkroom stuff and so far service is excellent:

Rollei R3 13x18

Ilford FP4

Maco...

Check out Ars-Imago in Switzerland. Or Fotoimpex.

Alcohol will make the leather brittle. Just a quick wipe with a damp cloth would be fine to clean the leather.

You can use an all purpose contact cement. Follow the directions in the package. If the old glue used was also contact cement, it should be easy enough to clean off just by slowly peeling it off from...

Yup Carbon Infinity is missing but the forum has three users, Ole, Paul and me. The other 117 made are MIA.

My lab does something the same thing as Jan's. They use 4 aluminum profiles from 70x100cm up. Anything smaller gets 2 aluminum profiles (one on top and one on the bottom part).

Checked some...

From the for sale header:



Cheers,

Edwin

Looking at her bio (V&A Curator for photography, Art+commerce etc) and her published work, she is very much at the forefront of setting trends on what collectors and museums will be buying in terms...

I've tried to digest Cotton's article bellow. After reading the article twice, I still could not wrap my head around what she was really trying to say. So I did what the old college way of trying to...

Monochrom has something similar too:

pixeltrust

Format it from the PC.

Otherwise use Macdrive

Cheers,

Edwin

I use Studio 13 in Zurich. They have a lambda.

I also use Foto Lautenschlager in St. Gallen. They use a Lightjet 430.

You can also send the CD by post with a proof print (100% crops) from your...

Thanks for the advice Ted and Robert.

After speaking with the seller, I'm set on buying the ATL-2200. It was super spec'ed by the owner (Autolab Water Heater, Autolab Stand/Cabinet, 15 liter...

I've recently bought an ATL-2 for USD 500.00, with experts drums, 2500 series drums, reels, bottles, tempering panel, spare bottle sensor, spare gears, spare o-rings etc. The chemical drain separator...

Im my area around 1mm thick aluminum. I have no idea what they use to bond my prints to aluminum but my best guess is permanent cold mounting sheets. I never did ask what they use.:confused:

I've recently sold a 70cmx100cm print mounted on 1mm aluminum with aluminum profiles glued at the back for hanging it on the wall. profiles were on four side ("U" aluminum profiles stuck at the back...

It's a special frame for the Sinar Booster measuring probe.

Another way for google to find you is to add a sitemap that Google can read and have google crawl your site. You have to open a google account. Here's the...

I've looked at the data sheet early this week and they clearly state data for sheetfilm too:

Konfektionierung (Available Sizes):
Kleinbildfilm: 135-36 Artikel Nr.: RSD1011
Rollfilm: ...

Early this year I was able to buy a Durst Laborator 1000 (color head, condensor head, complete condensor set and about 1000 sheets of Ilford paper of various sizes) cheap from a research center in...

1280 x 854 on 1.67Ghz Powerbook

Instant film and fast food:

http://www.jeffvespa.com/8x10_polaroids/burgers/001.php

Bon-ap,

Edwin

Request one from your local sinar dealer. They usually send it for free.

Great work. Registration worked like a charm for me and got the confirmation in a few seconds (Safari 2.0.4, Mac OS X 10.4.8, Powerbook G4 1.67Ghz).

The layout for the interview with Shelley Lake...

Rollei line of chemicals has the R3 Wetting Agent

Viewing hood slide lock.

Cheers,

Edwin.

Hello Geary,

The importer of Efke in Italy is Nemez. Perhaps your daughter can place a call to them for info on dealers in rome:

NEMEZ Import Export
Via Crispi 72, 34126 Trieste
Tel....

Neil,

My apologies in advance if I'm being presumptous or if I'm taking your statement out of context but I'm not sure what you mean by the above. Doesn't the Arca Swiss Reflex Viewer offer both...

I'm planning to modifying my Sinar Binocular Reflex viewer into a folding one similar to the Horseman Folding Binocular Reflex Viewer.

My plan is to use the mirror assembly and binocular on the...