Search:

Well, the SA 90mm f8, which has a flange focal distance of 99mm, will focus at infinity with the flat board.

Jon

They make a recessed lens board for using a 90.

Jon

Yes, but at $599.

Jon

The shutter was switched at some point from another lens. The f-stops will not be accurate, so I would pass.

Jon

I think local drugstore or photo shop should offer enlargements from prints.

Jon

Yes, cock the shutter before using preview.

Jon

I'm not sure what model that is, but on some Saunders models, the arm brackets are held square by spring pressure. You may be able to take the bracket off and bend the spring to increase spring...

Hi, which model is it? Could you post a picture?

Jon

Hang up the neg to dry by corner with binder clip or clothespin.

Jon

Thanks, upgrade now only available through Adobe, not amazon, staples, b&h etc. All agents are busy, oh well.

Jon

How do I upgrade from CS5 to CS6? I went to adobe website, but could only find Creative Cloud version.

Jon

40.5mm, but you can add a step-up ring

Jon

clearenvelopes.com (same company as clearbags, just different quantities, I believe).

Could be from a box camera. Oh, I see it was from a professional studio, so probably not.

Jon

The ground glass on a Tachi is a combination piece of plastic that is ground on one side (facing lens) and grooved on the back side, ie Fresnel. The cover glass is to protect it from scratching and...

Guess they would be for sliding splitter boards to expose one part of the film at a time.

Jon

Been several years since I have seen one, I am guessing the back is spring loaded and you move it upwards a bit to remove it?

edit: I think my camera was a ROC Premo, so different camera.

Jon

I have used the green magnesium Calumet C1. Folded up it is compact and has a handle at the top for easy carrying (top handles are great for handling). I carried the camera in one hand and the tripod...

You could bust a Holga apart and mount that lens to your lens board or shutter.

Ilex Portrait Lens 105mm f3.5 is a nice lens in shutter.

Jon

Hockey tape works good for flaps. It is thin, flexible and easy to trim with razor after applying.

Jon

The magnesium Calumet C1 is also around 13 lbs. as I recall, and folds up fairly compact.

Jon

I use a regular 60W bulb in reflector @ 30" with AZO and it works fine.

Jon

Can you provide pictures and measurements?

Jon

Some people attach the bag bellows on the back of Sinar to view.

Jon

It is a built-in rail inset into the long bed of the camera. Slides backward.

Jon

oops meant Epson 4870.

Jon

Usually, it says BOSSCREEN on it.

Jon

The Epson 3200 scanner is very good as well as the 4180. Should be available used for $50-100.

Jon

That is probably correct, but like I say you can go a few mm larger just to maker sure it fits in.

Jon

The hole will need to be large enough to clear the raised shoulder of the flange that sticks out the back of the flange into the hole. The flange is mounted to front of the lensboard. The diameter of...

Ah, I believe you are correct that there is a hidden single sided clamping mechanism. So long ago, I confused it with the Cycle Poco, which is just a simple screw.

Jon

CS3 will run. Check out the Dell refurb Ultrasharp series monitors. Nice IPS monitors for great price. I think under $200. Keep checking back at the Dell website. They go in and out of stock...

I believe it is a unique type of back for this camera, but sometimes found on ebay.

Jon

Here's another:
91631

Hi, it is a 5x7 camera. Seems to be missing its reversible ground glass spring back. You can view the Agfa Ansco catalog at cameraeccentric.com.

Jon

here is a photo of the one I had:
91627

Yes, do check it. The shim is a focusing shim to move the ground glass back a bit. Of course you remove the shim before inserting the film holder. I just built one up by sandwiching various...

Hi, I had a premo many years ago. The back is interesting because it allows for tilt and swing or any combination of movements by pushing or pulling. The front pin is supposed to tighten down on the...

The iris type doesn't grip too well until it is closed down a bit, ie can be tightened down.
Sorry, don't have those particular sizes... Just a mm or so off!

Jon

If you can measure them, put a wanted to buy ad here on the classifieds. I have a bunch of miscellaneous flanges and others do also. Plus you can find them on ebay, but they are expensive.

Jon

You can have flanges made by skgrimes.com. What size flanges do you need?

Jon