You may get what you need by extending the plunger. First, cut it, and solder a brass rod with enough length between the two cuts. I did that before.
Type: Posts; User: rob; Keyword(s):
You may get what you need by extending the plunger. First, cut it, and solder a brass rod with enough length between the two cuts. I did that before.
Another vote for the older look. My old eyes prefer the higher contrast page.
When I bought my apo rodagon-N 50mm, it was attached to a scanner CCD board. I have no idea what scanner it was in. I couldn't find any indications of the scanner brand from the board.
Check you ram timing in the BIOS. 2 years ago I built a pc and used a set of rams that has a built-in code to automatically set the BIOS to use a more aggressive timing (faster timing above the ram...
Can I get 2 boxes of 25 size and 2 boxes of 10 size? I can paypal the shipping cost. My zip is 98195.
thanks
rob
Missile testing, perhaps?
Yesterday, I got a like new pentax spotmeter V (late serial #, complete with case and cap) for $5.99 at Goodwill :D
can atn viper see with 940nm LED light?, like this one:
http://cgi.ebay.com/940nm-IR-Infrared-LED-LEDs-SIR-311STA49-Qty-50-/190286534827?pt=LH_DefaultDomain_0&hash=item2c4df618ab#ht_1721wt_778
a minty coated 360mm heliar for $166 and 180mm heliar in compur for $78. Both from epay.:D
This looks good, http://www.newegg.com/Product/Product.aspx?Item=N82E16883113124
Something like this :) :
http://www.ideinc.com/silfilm.html
It may be a dumb question: the software needs a dongle connected to the mac ADB connector (keyboard and mouse) in order to save the scan, did you check this dongle?
In barrel it's usually sold for ~$150. I bought one in barrel for $120. A new copal #1 is ~$300, total ~$450.
I assume it has SATA drive inside so I would open the case, remove the drive, and connect it to the SATA interface inside your computer, and see whether it would be recognized after booting.
That controller outputs a short pulse of "kicking" high voltage (may be 48 volts), followed by a holding voltage (6 or 12 volts depending on the shutter model). I built one myself to control my ilex...
my co-worker bought these: http://www.newegg.com/Product/Product.aspx?Item=N82E16883113101 and http://www.newegg.com/Product/Product.aspx?Item=N82E16824001317 for her graphic work, and she is very...
my copy of nikkor 150mm sw has a brass spacer between the shutter and front cell. Does your have one? It might be the problem.
Is uncoated (1,5xx,xxx) Zeiss tessar 150mm f:3.5 any good? A friend offered me one in compur shutter. What can it produce at wide open in 4x5 camera?
Is uncoated (1,5xx,xxx) Zeiss tessar 150mm f:3.5 any good? A friend offered me one in compur shutter. What can it produce at wide open?
Mine is the one with 6k pixel sensor, I think it's the 1st generation. I scan both slides and print. If you scan 35mm, my estimate of the effective resolution is about ~3600 dpi. I have an example...
I got one for $125 locally. I use an old powermac (scsi). The software needs a dongle to run! It's much better than my epson 3200.
This is my homemade cable for sinar shutter:
http://www.largeformatphotography.info/forum/showthread.php?t=17030
I made one myself, here: http://www.largeformatphotography.info/forum/showthread.php?t=17030
You probably can repair the cable yourself.
What LED color do you use? I 've been planning to do the same using luxeon royal-blue and green for my 45mx and vivitar VI.
This is a dumb question: Did you notice a shim stick to the shutter mount?
I heard a rumor they're having problem with their business, is it true? I think I'll call them tomorrow.
It could be scratches on the coating itself, not the glass. Some of my lenses and filters have a lot of "cleaning marks", but they perform just fine. May be my habit of using shade helps. I would...
I'd like to replace my beseler AN glass. Did anyone order AN glass from focal point recently?
I did better, I got mine for $1.99 on the bay :). It's a super book!
I'm in shock...
My deepest condolences.
rob
I bought this working power pack for a song (1 figure price :D ) , but no charger. I know dasaga.com sells one for $22, but before spending the bucks, does anyone have one forsale? I'm good with...
APO nikkor process lenses won't fit a shutter without custom machining.
I had similar condensation experience with a g-claron. I put the fogged cell in foodsaver vacuum bag (vacuumed and sealed) and heated it slightly and gently with hair dryer, it worked like charm, the...
I use memory with parity bit in my pc. does mac use memory with parity bit? With GB size memory, I'd imagine that the chances of getting bit errors increase.
I disassembled 210mm f/4.5 xenar front cell with a chinese spanner, it's easy. I marked the barrel and front element retaining ring, so that I knew how many turns I had to tighten it back.
Look here, post #58:
http://www.largeformatphotography.info/forum/showthread.php?t=10255&page=6
you may want to email him.
It's still not as a good deal as the nikkor 120mm AM ED macro lens which BH sold for $299 last year. The original price of this macro lens was $1080, that's 72% discount. The nikkor 120mm SW discount...
I've been wondering, can you put the fisheye converter lens for digicam in front of, say, 150mm nikkor W lens and get the fisheye effects? I have not tried it yet because good fisheye converters are...
Mine is multicoated, sn: 10 68x xxx
It's beautiful Sheldon.