Search:

So we could only try the setup today.
We put two ELH lamps. We connected the timer but it wasn't turned on. The fan was connected directly to the mains and it was working.
When we turned on the EST...

Thanks!
I will have an update when the new bulbs arrive next week.

also I guess it is a good idea to check the sockets:
https://www.largeformatphotography.info/forum/showthread.php?137740-Ilford-500-Bulb-Blowing-Blues&p=1380920&viewfull=1#post1380920




This...

sorry for double posting. It seemed the messages didn't post and then they did. And what is the power supply and the timer that you are using? Just curious, also I don't want to reinvent the wheel.

It is mostly used for RA4 process.
Could you please share the setup you have? What is the timer and power supply that you are using?

Thanks Drew. Yes we have the CLS 301 colorhead. We were using 120V, 300 watt lamps. They are not so hard to find in Germany and they cost around 12 euros. The EST 301 has 120 V output, and that's how...

https://www.largeformatphotography.info/forum/showthread.php?141873-CLS-301-Restoration&p=1410348&viewfull=1#post1410348

hmm maybe try with two lamps, and problem will be solved?

Connections to EST 301:

191552

Hauck timer:
191553

Hi,
We are trying to repair the enlarger we have it in school. The last repair was done by the guy who repaired the metaform processor of the school. He is quite old and we couldn't find anyone who...

how old are your kits?
thanks for the answers, I will check them next week.

one of the shop that I buy my stuff said he had acquired some kodak e6 single use kits. I know it has been discontinued, I would much prefer it to tetenal 3 step kit, but is there a chance of...

thanks for your suggestions. I found the part from http://www.gitzospares.com
and you are right jerry, it could mess the threads. I know someone working in the workshop of a industrial design...

i founded the exploded diagram of the tripod, someone may need it in the future.
as you said otto, the bolt is clearly missing (d4040.95)

thanks otto!!
how couldn't I think that! The tripod was like that for a while, so I never thought something was missing. I guess I can fit a bolt from a hardware store, probably I wouldn't need a...

hi,
I want to tighten the top part of my tripod where the head is mounted, but I couldn't figure it out and so far I could not find any manual or post for doing that.
I have attached a picture; so...

thank you gem!

I'm looking for a lens board to mount a sironar-n 240mm with copal 3 shutter. As far as I know the copal 3 shutter is 65mm. I have found a wista lens board on keh.com, but it is 64 mm. Do you think...

I have a toyo 45cf with linhof adapter, so 96x99mm technika or wista board should fit. I've just checked keh.com and they have wista boards, but the hole size is 63 or 64, do you think that would...

Thanks a lot for the comments.

I think it is better to go with this one, since only difference between the two is probably the fake stamps.

I was looking for a lens board for a 240mm sironar with copal 3 shutter and found this:
http://cgi.ebay.com/Lens-Board-Copal-0-1-3-LINHOF-WISTA-96x99mm-/110603017443#ht_1292wt_1141

The seller is...

Hello,
I'm going to buy filters for my 300mm and 150mm geronars, and since I don't have the lenses at the moment, can someone confirm the values I have found: 58mm and 40.5mm respectively.

that tripods really seem solid, I will check the markets here; but unless I can find it here, the shipping could be too much because of the weight.

I will check that out Jerold, thank you (I also spotted some feisol tripods on ebay).
By the way do you think it is better to use a 3-way head instead of a ball head? Isn't it a bit hard to control...

Hello,
I have recently acquired a toyo 45 cf camera with lenses and holders, I was using a medium format before, but I wanted to try large format for a while. I'm already reading steve simmons'...