If you can extend the crack all the way across, you may be able to pull it out the other end.
Jerome
Type: Posts; User: photographs42; Keyword(s):
If you can extend the crack all the way across, you may be able to pull it out the other end.
Jerome
I used mine for negative washing. Push a hose (plastic tube) into the center and it forces the water in at the bottom and over the edge at the top.
Jerome
I have a '97 Gmc Yukon that I use regularly when photographing Hospital Projects. The top is solid and there is plenty of room on top. I can reach the top to put my gear up there from the ground and...
Around two years ago we (members of this forum) published this book: http://www.blurb.com/bookstore/detail/257631 .
Each person was allotted two facing pages. There are 73 members represented and...
Very Nice Ken.
Jerome
www.jeromehawkins.com/
I've used many rolls of Colormount over the last 25 years or so on prints up to 30"x40" and never thought it was "floppy". You must be thinking of something else. Colormount looks and feels like MT5....
RC and Color print paper will melt at high temps. Fiber paper won’t melt but with the temp too high or heat cycle too long it will ferrotype, usually in a blotchy pattern and can stick to the...
I would cut 4 1x12’s the width of the tub and put the trays on the boards. The 4th board is for a water bath tray. Glue rubber to the bottom where the boards touch the tub and you’re set. It won't...
Welcome Tim!
Where in St. Louis do you live? I’m near Page and 270.
I’m in the twilight of my mediocre photography career but I’m still “hooked”. I use a 5x7 with lots of lenses. If you need...
I have a 1986 brochure that shows the 105M, 200M, 300M and 450M, in all black Copal shutters. Hope that helps. If you need any of the spec data I would be glad to get it to you.
Jerome
I'm sure that a lot of the folks that removed the rangefinder from their Tech III's still have them in a drawer and would be glad to sell you one for a few bucks.
Jerome
I used Black photographers tape. It’s like paper masking tape but is black and light proof. Put it on the inside and carefully re-crease the bellows. I repaired a Linhof bellows this way about 25...
There is an old saying about the difference between a speed boat and a sailboat. The difference is:
If you are on a speed boat you are going somewhere. If you are on a sailboat, you are already...
ZoneVIII...
THAT is a really nice image. Well composed, well balanced, well executed. Thank you for sharing.
Jerome
You’re right Bob…..well sort of. I do have a 1958 vintage 4x5 Super Tech IV but it has set in the closet since 2000 when I bought a 1954 5x7 Tech III that I have used since then. I forgot that the...
Hi Gem,
I grew up in Fort Worth and still have family there. Good to hear that the Museum is already on your schedule.
Where is Joe T's? I usually head for the Railhead (2900 Montgomery) for...
For those of you in the DFW group that aren’t from Ft. Worth, the Amen Carter Museum has one of the largest collections of B&W photography in the country.
If you haven’t already, you might make...
I have a Tech IV which doesn't have forward tilt but the back has about 15 degree tilt either way. I'm pretty sure the Master has the same back movements.
Jerome
I made a hem on one edge and put elastic in the hem. Then I added Velcro at the ends of the elastic section. This makes it adjustable for different cameras and I haven’t altered the camera by gluing...
Like others here, my film holders go into Zip Lock bags as soon as they are loaded with fresh film. I put two holders in each bag because when I decide to make an exposure, I make a back-up exposure...
Use a paper punch to punch notches in patterns along the edges of the film before loading it into the film holders.
Jerome
I've used Black Photographic tape (on the Inside). Works well for small holes.
Jerome
Is this the Head with one Blue and one green light tube? If so, are both tubes working? Also, how are they controlled?
Jerome
In most cases you can measure a similar shadow that is close to you. Remember that the shadow value is a combination of science and judgment. The numbers don’t lie, but you have to make a judgment...
It may not matter to you, but the Nikkor has an image circle of 200mm @ f/9 and 310mm @ f/22. The Fuji has an image circle of 620mm @ f/22.
The flange distance of the Fuji is 573mm per the chart...
The minimum marked aperture is usually the minimum because beyond that, the image quality is degraded more than the manufacturer feels acceptable. You can go smaller but you pay the price in image...
There is a simple test for focus accuracy. I’m sure it’s documented somewhere but simply stated, you photograph a ruler (preferably a flat metal one) at an oblique angle. Focus on the 6” mark with...
About 15 years ago I was in Albuquerque photographing a Bank designed and built by the company I work for. I flew in the evening before and drove by the bank (it was closed by then) to check it out....
I must have lucked out. I have two of the 410‘s that I use with a 5x7 Linhof and they are very solid and even though one of them (the one still used the most) is 15 to 20 years old, it has no sign of...
This looks very enticing. I have 3 Linhof finders. A 5x7, a 4x5 and a combo 4x5/5x7. I have used them for years and wouldn’t go out without one.
But they aren’t perfect. The disadvantages are: 1)...
I have only been involved with Photography for 45 years or so but I've never heard the term "slide Formatting". Perhaps you misunderstood, or maybe it's a local thing. You should ask the instructor....
Not a lot has been said about this, but for me it is more about the experience. For my job as an Architectural Photographer, I just upgraded from a D200 to a D700. Big improvement! But I’m still...
I use a Pentax Digital Spot meter. I have other types but in the almost 30 years I’ve never needed another meter. I suppose it has a lot to do with the type of photography one does. My personal work...
John,
I think you are on the right track. I used 4x5 for 18 years before moving up to 5x7 and I wouldn’t go back. But I only do B&W and film choices are limited with 5x7. I never used a 150mm on 4x5...
United has most things related to framing and hanging.
Jerome
http://www.unitedmfrscatalog.com/2007_master/lg_display.cfm?page_number=IFC&catalog=070150
Frank,
Your new book looks good.
How long have you had it? When we did the LF Group Book I noticed that some of the B&W images were a little on the olive side but after a few days they became...
I’m sure people more knowledgeable than I will chime in but all of the Copal 3’s I have owned have a spacer ring that can be placed in front of or behind the board. Does yours have one?
Jerome
My 5x7 Technika weights around 12 lbs and I carry it over my shoulder all the time with no problem.
Jerome
Santo,
My experience is pretty much the same as the others. Zip-lock bags and cool storage space and you should be good for up to a year.
You didn’t ask about this end of it but I’ve read that...
WOW!!! This is a VERY ambitious plan for your first Art Fair outing. Although I have never attended this particular show, I have done shows in the Midwest for over 25 years and would like to offer a...