Re: Incident meter technique
Eric, that's pretty much what I do with my old LunaPro (= LunaSix III), Master V, and Sekonic L-328.
Re: Incident meter technique
Different meter are structured differently, but for incident metering, you point the DOME at the camera (in front of the subject, if possible). Whether the body of the meter is pointing at the subject is irrelevant. Many meters let you re-position the dome so that the meter readout is pointed at you, while the dome is pointed at the subject.
Re: Incident meter technique
You can download a manual for it. Nice meter BTW, I just got one. Trying to figure out BTZS.
Re: Incident meter technique
In 44+ years of using a Luna Pro I always pointed it back at the camera position from the subject or, if that’s not possible, from the same light falling on the subject. Always worked for me with that meter and my Weston Vs. If light on the subject is a bit patchy, then you have to give that some thought. Being in bright or dark patch could throw things off and move you off “average.”
Re: Incident meter technique
Your getting good advise. I can’t add anything more than I do what they are telling you to do.
Re: Incident meter technique
My late lamented alma mater, Brooks Institute, taught an interesting technique in the early 70s. As described so well by so many previously, you simply point the integrating hemisphere at the camera from the subject position (or simulate the condition as best you can if the subject is hard or dangerous to reach.) We also learned to take a reading from the shadow side of the subject. The goal is to know the ratio between the directly illuminated parts of you photo and the shadow side visible to the camera. With some bit of testing, you can relate the ratio to a suitable development time and also arrive at a good exposure. I have lost my notes on the exact process or I'd share the details. I made many nicely printable negatives that way. If you can control the lighting ratio, you can control the whole thing from concept to finished print reliably. Have fun with this!
Re: Incident meter technique
Ken Lee gives a nice little tutorial for metering on his website.
Re: Incident meter technique
You might find this brief article helpful: A Simpler Approach to Metering.
Re: Incident meter technique
That's fine Ken, just ignore the fact that I had just posted a link to your web page...doesn't hurt my feelings at all...