Where can i find the defacto standards for distance of film back to ground glass etc... I have been looking into making my own 4x5 metal camera. Would appreciat e any sources of technical details involved.
Printable View
Where can i find the defacto standards for distance of film back to ground glass etc... I have been looking into making my own 4x5 metal camera. Would appreciat e any sources of technical details involved.
Some information is on the page http://home.sol.no/~gjon/lffaq.htm Also there are some other pages in WWW about View Camera construction (but from wood),I can not remember now. Have a nice time! Sergey.
Measure a loaded film holder. The distance from the face of the film holder to the emulsion on the film is the EXACT distance the groundglass needs to be from the face of the filmback.
email me if you have questions regarding building a metal view camera. I am a machinist and large format camera manufacturer. I will answer any specific questions that I can.
Barry
Please note that the URL of my camera building site is now: http://home.online.no/~gjon The old site is not being updated.
What you need is a copy of ANSI Z38.1.51-1951 This is the Dimensional information for Photographic Double Film Holders of the Lock-Rib Type. It will give you dimensions and tolerances for 2-1/4" x 3-1/4" upto 8" x 10" Holders. As for gg placement, you'll have to factor in the average film thickness you intend to use and make any necessary adjustments for a Fresnel brightening screen if you intend to put one between the gg and the lens. Good luck!
New URL: http://jongrepstad.com/Quote:
Originally Posted by Yarigin Sergey
Jon Grepstad