I use a vinyl padded zippered cd case with the cd sleeves removed. It fits a 150 or 210mm lens on a Sinar board perfectly. Not sure if these are still made, though. It's from about 10 years back.
Printable View
I use a vinyl padded zippered cd case with the cd sleeves removed. It fits a 150 or 210mm lens on a Sinar board perfectly. Not sure if these are still made, though. It's from about 10 years back.
Before I upgraded my pack and lens holders to Photobackpacker, I used Lock n Lock containers to hold most of my lenses. They were good for most of my lenses, including 125/150mm Fuji W, 210mm f/6.1 Caltar Pro, 300mm Nikkor M, and 450mm Fuji C. The larger lenses, like a 90mm f/8, went into a plastic index card box that was padded with foam. Now, the 90mm goes in a padded Fishpond reel case. I put some sticky back hook Velcro on the bottom so it will work well in my Photobackpacker P3. All of my lenses are mounted on Technika-type boards.
The "official" lens wraps by Domke, etc. are nice but cost a bit more than I wanted to spend so I made my own.
I went to a Dollar Tree store and bought gold color micro-fiber cloth pieces in the kitchen/cleaning section. Then I went to Home Depot and bought self-adhesive Velcro strips. I cut the Velco into matching square pairs. I stuck the Velcro onto the corners of the micro-fiber cloth. DIY lens wraps!
On my next trip to the Dollar Tree store I noticed large fluffy white micro-fiber cloth pieces being sold in the automotive section. To reduce the chance of loose fibers getting on my camera gear, I washed and dried the cloths.
Now I double wrap my lenses. First in the gold DIY lens wraps, then a second time in the fluffy white cloths.
›
Most of my 4x5 work is on the sets of film and television productions where I create character studies of actors in wardrobe and makeup so I have to carry a lot of equipment.
I broke my 4x5" equipment down into two kits. Most of my lenses are on 4x4" Crown Graphic lens boards. My Cambo has an adapter lens board that accepts Crown boards which means the lenses can fit onto either camera. Only my extreme wide angle and long lenses are on full-sized Cambo lens boards. By having the majority of my lenses on the small Crown boards it makes packing and transport much easier.
Kit #1:
case is a beat up old Graflite case purpose-built for 4x5 Speed/Crown Graphic cameras and accessories
4x5 Crown Graphic
135mm f/4.7 Graflex Optar installed on the Crown
150mm f/5.6 Fujinon (in a large plastic yogurt tub)
240mm f/6.8 Tele-Congo (also in a yogurt tub)
The two yogurt tubs fit into one corner of the Graflite case.
Also in the case is a dark cloth, level, small CREE LED flashlight, six sheet film holders, model releases, notebook, cable releases, etc.
Kit #2:
case is a beat up Cambo case I finally found used (cases for Sinar, etc. are too narrow)
4x5 Cambo with standard bellows
Cambo lens board adapter to accept Crown lens boards (mounted on the camera with a blank Crown board)
Cambo bag bellows
Nikkor-SW 90mm f/4.5 on a Cambo recessed lens board
Schneider Symmar-S 210mm f/5.6
Rodenstock Sironar-N 300mm f/5.6 on a standard Cambo lens board
accessories: Cambo compendium, level, small CREE LED flashlight, rubber squeeze ball shutter release, cable releases, etc.
Yes, there is some duplication but if I just want one kit or the other, each is fairly self-contained.
The two 4x5 kits fit in the back seat or trunk of my car. Also in the trunk is my Manfrotto fluid head video tripod that I found works quite well with my Cambo. I have a smaller Manfrotto tripod for the Crown kit.
I carry most of my sheet film holders in soft-sided insulated thermal coolers.
I also carry in the trunk of my car light stands, reflectors, strobes, etc. in case they are needed.
I carry all mine in Tamrac packs..
I use some neoprene lens pouches from Cartom. They are called Neo-Pro Wide Mouth lens carriers. Have been using them for years. Only downside might be that they probably won't work with large lensboards. My lenses are on Teknika style boards. http://www.cartom.virtual-space.com/photop.htm
I like using plastic coolers too. I like to roughen them up a bit first by applying a bit of silver duct tape, then tie a rope to the handle and drag it a short distance behind the car (slowly!) The perfect disguise.
Be aware though that Yosemite bears really can read words like "Igloo" and "Coleman" and plan accordingly.
I use a reel case from Cabela's. I can fit 6 large lenses on 6 x 6 boards for my 8 x 10.
http://www.cabelas.com/product/Cabel...h-All+Products