1 Attachment(s)
Cable release socket broken off......
Attachment 98790my old 165mm super angulon, the big one in the black/silver shutter. The cable release socket is missing/broken off (previous owner) and I've been able to use it by hot gluing a cable release in position (ugly and has come loose more than once). Anyone have a replacement that will fit these holes? Long shot, I know. I do have a milling machine.
Re: Cable release socket broken off......
here are the specs for cable release threads. Tapping a hole to match takes some gear I don't have.
http://s274.photobucket.com/user/Gle...Large.jpg.html
Re: Cable release socket broken off......
Perhaps you could mount a Linhof Quick Socket to the board. The Socket's pin could go into the hole, once the screw is removed.
This is another Linhof part that might work once mounted.
Re: Cable release socket broken off......
Quote:
Originally Posted by
Jac@stafford.net
That is a picture of a Right Angle PC tip for flash synch when the lens is mounted in a recessed lens board. It has nothing to do with a cable release. It is also for a Copal shutter, not a Compur.
When I packaged and sent the repair parts at Marflex up to Nippon there was a box of Compur spare parts - also a box of Copal spare parts - Nippon might have the part that you are looking for.
Re: Cable release socket broken off......
Quote:
Originally Posted by
vinny
The original spec is a US government spec for these threads. I have been trying to buy a stock tap for about a year and it doesn't exist in the world. I'm gonna have to have some ground to order. When I do, I'll get a dozen.
Re: Cable release socket broken off......
For a socket, perhaps trimming down the right wirenut would work?
Attachment 98853
Re: Cable release socket broken off......
Anyone know a similar socket that'll fit. Bob, I'll contact those guys.
Re: Cable release socket broken off......
Nippon said it cannot be repaired because the shutter housing is broken. ??? Looks like a straightforward fix if I had the part. I'll make the part tapped with 6-32 threads for now. Evan, I'll take one of those taps. Or two, I tend to brake taps.
Re: Cable release socket broken off......
Re: Cable release socket broken off......
Evan,
When you make these taps, please get some prepaid pre orders here. I need one also.
Thanks!
Quote:
Originally Posted by
evan clarke
The original spec is a US government spec for these threads. I have been trying to buy a stock tap for about a year and it doesn't exist in the world. I'm gonna have to have some ground to order. When I do, I'll get a dozen.