Re: Dry plate development
Pull a darkslide out at time intervals
Re: Dry plate development
If you're using Zebra Dry plates, I personally found HC-110 to be much too aggressive and my first plates were nearly black, too. I finally settled on Thornton's Two-Bath or 510-Pyro at 1:150. If your scenes reveal a lot of sky, that area will be quite dark. I always had good luck with HC-110 for J Lane plates.
Re: Dry plate development
Quote:
Originally Posted by
Alan9940
If you're using Zebra Dry plates, I personally found HC-110 to be much too aggressive and my first plates were nearly black, too. I finally settled on Thornton's Two-Bath or 510-Pyro at 1:150. If your scenes reveal a lot of sky, that area will be quite dark. I always had good luck with HC-110 for J Lane plates.
Alan, Yes they are Zebra Dry plates. it’s much cheaper to by them here in Europe and supporting a young enterpreneur who is still in old techniecs.
HC-110 is advised by him so that’s why I used it. I not quite sure If can find 510-Pyro over here.
Re: Dry plate development
Quote:
Originally Posted by
Tin Can
Pull a darkslide out at time intervals
I agree with the test strip, but it might be easier ( not chance of camera movement ) using the dark slide in front of the lens….
I can’t really comment on the developer ( or zebra plates cause I haven't used it )
but it’s basically paper emulsion on glass instead of paper so contrasty scenes (not open shade ) always prove to be difficult unless you make believe you are in your darkroom making a problematic-print and do similar moves but with your camera.. like flashing the plate like you would a hot print and using a method to even out the tonality … I've never used HC but mostly just stock print developer, and for a while now I have resorted to 2 baths one is caffenol to slowly develop the mid tones and the other Is caffenol spiked with your favorite print developer ( a splash ) to develop the contrast ... first the one with the print developer, when the image appears in the veil then into the caffenol ... I've also done this with dektol ( and ansco 130 ) one bath being spent and the other one being less spent works like a charm doing 2 bath development .. just have to be careful, dry plates can be fragile
Have fun with your glass images !
Re: Dry plate development
Quote:
Originally Posted by
PatrickMarq
Alan, Yes they are Zebra Dry plates. it’s much cheaper to by them here in Europe and supporting a young enterpreneur who is still in old techniecs.
HC-110 is advised by him so that’s why I used it. I not quite sure If can find 510-Pyro over here.
If you review his technical tips page on his website, you'll find that 510-Pyro is the first developer listed; and, I believe, they're listed in order of preference. On your side of the pond, Zone Imaging sells it as well as other dealers in the UK. Personally, it took me quite a bit of playing around with different developer formulas, dilutions, and agitation styles to arrive at something that worked for me with Zebra Dry Plates. Since he is literally the only one in the world coating these plates for commercial resale, I had to figure it out because I love shooting plates.
Re: Dry plate development
Quote:
Originally Posted by
Alan9940
If you review his technical tips page on his website, you'll find that 510-Pyro is the first developer listed; and, I believe, they're listed in order of preference. On your side of the pond, Zone Imaging sells it as well as other dealers in the UK. Personally, it took me quite a bit of playing around with different developer formulas, dilutions, and agitation styles to arrive at something that worked for me with Zebra Dry Plates. Since he is literally the only one in the world coating these plates for commercial resale, I had to figure it out because I love shooting plates.
Allan,
Some feedback: I found some 510-pyro and at first look, two new developments looks great.
Re: Dry plate development
Quote:
Originally Posted by
PatrickMarq
Allan,
Some feedback: I found some 510-pyro and at first look, two new developments looks great.
Great news indeed! Enjoy shooting those dry plates...it's a lot of fun!
Re: Dry plate development
Quote:
Originally Posted by
Alan9940
Great news indeed! Enjoy shooting those dry plates...it's a lot of fun!
It’s now a lot of fun, before lot off stress.
Now it’s time to buy one or two extra holders and a box(es) for storage.