Yep you are right--no decorum on the internet ;)
Printable View
Yep you are right--no decorum on the internet ;)
So, when you get that big print and mount it on the wall, please take a photo of the installation and post it here to satisfy our curiosity.
Thanks!
Hi There
I would start off with a very good scanner, and make the file big in 16bit.
We print large scale from various size all the time and for the size of print you are asking for I would make an RGB file in the neighbourhood of 3-7hundred mb.
You mentioned scrutiny and here we would use an Eversmart Supreme Scanner or Imocan, depending on art work supplied.
16mb is unfortunately not going to cut the mustard, and a Epson Flatbed would not be the scanner of choice for this project.
Quote:
Originally Posted by Creekhollowgirl
My posts were probably among the obnoxious ones: please forgive my rudeness.Quote:
Originally Posted by Creekhollowgirl
I don't think that it's a good idea to output JPG and throw away information so early in the process. I'd scan at the maximum optical resolution of your scanner and keep it in TIFF until it goes to the printer and let them start with a non-compressed (well, non-lossily compressed if there's such a word!) file. Drum scans would be nice but probably too expensive/time consuming.
Heck - if you walk up and put your nose to one of Saint Ansel's large prints they really aren't so amazingly sharp - and it didn't seem to diminish his artistic/economic stature all that much!
Attachment 149706
I didn't take this photo and have not seen the installation myself. Little disappointed, because it appears to have been skewed when they did the canvas wrap.
Thank you all so much for all the input!
It's a historic photograph and probably wasn't level to begin with. When reproducing a historic photograph there is always a question about whether to "fix" an original problem or not and there is no correct answer.
Hi Kirk thank you for the response :), I did "fix" it prior to printing and checked the canvas when it arrived prior to sending it to be mounted....:( I still haven't seen it in person though it could be the angle of the snapshot.Quote:
Originally Posted by Kirk Gittings
Ahh - the magic words -"Canvas Wrap".
I bet it looks really good where it is. Canvas isn't an ultra-high resolution medium, so I would have worried a lot less about the resolution. I have a couple of 44 x 66 canvas wraps that I did for a gallery show and even though I started with 5 x 7 and 8 x 10 originals I wouldn't hesitate to work from something a lot smaller if it was going to be printed on canvas. They can look quite nice even if they aren't knife sharp. Nowhere near the tonal range of a good paper print, but for what they are and where they are they can be very effective - size matters!
Congratulations!
I like how those black and red things are stacked up the wall. BTW, someone must have messed up your installation, the picture is turned 90*.Quote:
Originally Posted by Creekhollowgirl