Dur-Lar/Mylar alternatives?
Hi all,
I've been looking into alternatives for wet scanning using when Dura-Lar/Mylar to sandwich the negative, really to see if I can find a cheaper item that does the same thing as Mylar or Dura-Lar.
I'm aware that Mylar is just a product name invented by DuPont who produce it so if anyone knows what Mylar basically is that would be great.
I'm based in the Uk and I contacted a company who supply different plastic sheets for many trades, they suggested a product called Melinex (also made by DuPont), I got a sample sheet and I wondered if anyone else had experience of scanning with Melinex?
The sample I got is 75 microns thick, as oppose to 125 Mylar which i have previously used, I guess scanning is the only way to tell if it's a suitable alternative. be good to know if anyone has tried it though.
Thanks.
Re: Dur-Lar/Mylar alternatives?
One thing I would do first is to do a test with the material and your mounting fluid to make sure it doesn't melt the material. Then I would test with an old negative to make sure it doesn't stick too much.
Doug
Re: Dur-Lar/Mylar alternatives?
First, Mylar is a trade name for clear, uncoated, polyester film. Dura-Lar is similar, clear polyester, and is available in a wide range of thickness and sizes. It works fine for fluid mount scanning and I can not imagine you could save much with another product.
Mellinex is also polyster but most types have some type of coating for accepting inks. I actually use Mellinex 339 as a support for single transfer carbon but the material I use is quite expensive compared to clear polyester.
If you are unable to buy Dura-lar in the UK, just do a search for clear, uncoated polyester. 3 mil thickenss is about perfect for fluid mount scanning.
Sandy
Re: Dur-Lar/Mylar alternatives?
Quote:
Originally Posted by
Doug Fisher
One thing I would do first is to do a test with the material and your mounting fluid to make sure it doesn't melt the material. Then I would test with an old negative to make sure it doesn't stick too much.
Doug
thanks Doug I'll try that.
Re: Dur-Lar/Mylar alternatives?
Quote:
Originally Posted by
sanking
First, Mylar is a trade name for clear, uncoated, polyester film. Dura-Lar is similar, clear polyester, and is available in a wide range of thickness and sizes. It works fine for fluid mount scanning and I can not imagine you could save much with another product.
Mellinex is also polyster but most types have some type of coating for accepting inks. I actually use Mellinex 339 as a support for single transfer carbon but the material I use is quite expensive compared to clear polyester.
Thanks Sandy, the Melinex I have is # 516 and is 75microns thick. Any ideas if that's suitable? It appears to be clear.
If you are unable to buy Dura-lar in the UK, just do a search for clear, uncoated polyester. 3 mil thickenss is about perfect for fluid mount scanning.
Sandy
Re: Dur-Lar/Mylar alternatives?
Thanks Sandy, the Melinex I have is # 516 and is 75microns thick. Any ideas if that's suitable? It appears to be clear.
Re: Dur-Lar/Mylar alternatives?
Quote:
Originally Posted by
DannyTreacy
Thanks Sandy, the Melinex I have is # 516 and is 75microns thick. Any ideas if that's suitable? It appears to be clear.
Mellinex 516 appear to be a clear polyester treated on both slides to prevent slip.
http://www.marianinc.com/wp-content/...LINEX®-516.pdf
It should work, but before risking negatives pour some of your fluid mount solution on the surface and leave it for a few minutes before wiping it off. Also, you might heat it a bit as some scanning produces heat.
Since you have a sample try it, but there is no reason to believe it would work better than plain polyester with no coating.
Sandy
Re: Dur-Lar/Mylar alternatives?
Quote:
Originally Posted by
sanking
First, Mylar is a trade name for clear, uncoated, polyester film. Dura-Lar is similar, clear polyester...
Sandy
Hello Sandy,
Just an addition, polyester is a family of polymers, Mylar is a member of this family: polyethylene terephthalate (PET), with an special mechanical extrusion treatment.
Mylar, Melinex, and Hostaphan are different brands for the same polymer of Biaxially-oriented polyethylene terephthalate , called BoPET .
PET is Biaxially-oriented to be BoPET by mechanical a extrusion process from the raw PET material.
https://en.wikipedia.org/wiki/BoPET
Plastic botles for soft drinks are also commonly made of PET.
PET repels water, for wettability characteristics (like Grafix ) of PET a surface treatment may be applied, like plasma or UV excimer light: http://www.nature.com/pj/journal/v43...pj201120a.html
PET wettability is also critical for emulsion coating, for DIY film, Denise explains it in TLF, were I learned that.
I guess that for scanning wettable PET is undesired, as mounting fluid is (non polar) oil.
Regards
Re: Dur-Lar/Mylar alternatives?
Quote:
Originally Posted by
Pere Casals
Hello Sandy,
Just an addition, polyester is a family of polymers, Mylar is a member of this family: polyethylene terephthalate (PET), with an special mechanical extrusion treatment.
Mylar, Melinex, and Hostaphan are different brands for the same polymer of Biaxially-oriented polyethylene terephthalate , called BoPET .
PET is Biaxially-oriented to be BoPET by mechanical a extrusion process from the raw PET material.
https://en.wikipedia.org/wiki/BoPET
Plastic botles for soft drinks are also commonly made of PET.
PET repels water, for wettability characteristics (like Grafix ) of PET a surface treatment may be applied, like plasma or UV excimer light:
http://www.nature.com/pj/journal/v43...pj201120a.html
PET wettability is also critical for emulsion coating, for DIY film, Denise explains it in TLF, were I learned that.
I guess that for scanning wettable PET is undesired, as mounting fluid is (non polar) oil.
Regards
Er, so it's ok to scan with Melinex??!
Re: Dur-Lar/Mylar alternatives?
Quote:
Originally Posted by
DannyTreacy
Er, so it's ok to scan with Melinex??!
Hello Danny,
Sure that the right type of Melinex should be ok. But you have to take (IMHO) the good type.
I found this here: http://www.katco.eu/uk/site__1347/
Melinex® 401 - optically clear film
Melinex® 505 - optically clear, printable film
IMHO some types of Melinex can be better or worse for you.
You sure know that a substance can be lipophilic or hydrophilic. Raw Melinex is lipophilic so it is good for your mounting fluid.
Some Melinex types are treated in the factory to be hydrophilic (wettable) instead, in this way those sheets can be printed with water based inks, IMHO this kind of Melinex are bad for scanning, as its surface repels oil.
So IMHO the 401 type should work better than the 505, because the 505 repels oil (I guess) and this should make harder to evacuate air bubbles.
IMHO when a Melinex type is said "printable" it may be hydrophile, so the wrong kind for you.
Here there is all types... https://www.tekra.com/products/films...ter-pet?page=1
For the 516 type that Sandy is pointing it says:
Good handling properties
High clarity
Brilliance
It says nothing about printing, so it should be of the good type for you.
In my case, I coat my DIY film with my DIY emulsion (still testing), so instead I need sheets of the the other type than you, because photographic emulsion contains water and no oil, so the type that is good for you it would bring problems to me as it would not help to spread water emulsion, and forming separate drops on it.
Regards