Using a"reveal" around an overmatted picture
Greetings,
I like the look of a "reveal" around a dry mounted picture that is overmatted. T hat is there is a space between the edge of the dry mounted picture and the edge of the bevel cut overmat.
My question is whether folks like to make the bottom reveal slightly thicker tha n the top and side reveals, to again give a little weighting to the bottom just like we do when we cut the overmat and have a little more mat at the bottom. Cur rently for an 8x10 picture mounted on a 14x17 board, I am considering using a 1/ 4" reveal around the top and sides, and a 3/8" reveal at the bottom.
Please chime in with your aesthetic opinions!!!
Scott
Using a"reveal" around an overmatted picture
Yes, definitely use more space at the bottom. I mount all my prints using this method.
Using a"reveal" around an overmatted picture
I use more space as well...usually for a title/signature.
Using a"reveal" around an overmatted picture
Using a"reveal" around an overmatted picture
You are correct. It results in an optical centering of the image.
Using a"reveal" around an overmatted picture
The amount of space is a matter of personal preference, but I do believe that 1/4" may make it more difficult to cut an even border around the entire print. The wider you go, the more forgiving slight variations in the straightenss of the cut or the accuracy of your measuring will be. I've standardized on 1/2" left, top and right, 5/8" on bottom for my 8x10 and 11x14 images and 5/8" left, top and right, 3/ 4" on bottom for my 16x20's. This not only gives me the extra "base weight" for a pleasing balance, but also provides me with some extra space at the bottom where I typically sign and number my prints. Just a little more room the breathe.
Using a"reveal" around an overmatted picture
Yes I also present exhibition work this way although I reveal about 1/4" of the white border of the print rather then the mount but aesthetically its the same. On the odd occasion when presenting a "panoramic" image I oftern have a larger t op margin then the two sides but the base is always kept slightly larger. regards,
Using a"reveal" around an overmatted picture
Scott, There is a good description of the technique you descibe in Ansel Adams "The Print". He too recommends more space at the base!! Regards Paul
Using a"reveal" around an overmatted picture
Scott,
My practice is the same as yours. Like a previous poster, I increase the width of the reveal roughly proportionally to the size of the mountboard/overmat. But I would add that I would make the bottom reveal wider than top and sides *only if* I intended to add date, title, and signature. Even when the bottom of the mat is deeper (and I follow the 45% top, 55% bottom formula suggested in an earlier thread), a proportionally deeper bottom reveal to my eye demands the presence of writing. Without writing, I would make the reveal the same all the way around. Best, Nick.
Using a"reveal" around an overmatted picture
I just saw the new AA exhibit at SFMOMA. Almost all of the prints were mounted with the reveal, which I think was the same size (maybe 3/ 8 in.?) all the way around.