Feedback - Photobackpacker Cascade Film Holder Cases

I have also been using the 4x5 Cascade Film Holder Case, but the outer cover is a bit thin and wrinkles easily. And the light gray color makes dirt easily visible. I wish there were other colors too.

Quote:

---

Originally Posted by Photobackpacker

Could you post a picture of your modification. My moddled old brain can't picture what you are describing. :)

---

Attachment 242381

I guess a small window would work as well.

Quote:

---

Originally Posted by younghoon Kil

I have also been using the 4x5 Cascade Film Holder Case, but the outer cover is a bit thin and wrinkles easily. And the light gray color makes dirt easily visible. I wish there were other colors too.

---

Thanks for that info. Mine look like they have been through the war but the inner pockets are still sound and are protecting the film holders which is my primary concern. Am I correct that it is your outer cover that is displaying the dirt?

Quote:

---

Originally Posted by Fred L

Attachment 242381

I guess a small window would work as well.

---

Thanks for the picture. That certainly ID's the film! :) It would be an easy customization to sew a patch of Loop to the front cover. I will give this some thought. I appreciate your input!

I use the 5x7 for 4x5. I can fit 3 4x5 into each of the lower pockets and use the 2 upper pockets for my light meter , measuring tape, cables and filters. Every thing is right there hanging on the tri pod. Love it.

Quote:

---

Originally Posted by lloyd goode

I use the 5x7 for 4x5. I can fit 3 4x5 into each of the lower pockets and use the 2 upper pockets for my light meter , measuring tape, cables and filters. Every thing is right there hanging on the tri pod. Love it.

---

Now that is max use!!!!! I love it!!! :)

Bruce, can you share what the white write on material is that you use for the pocket identification area?

Quote:

---

Originally Posted by Photobackpacker

Thanks for the picture. That certainly ID's the film! :) It would be an easy customization to sew a patch of Loop to the front cover. I will give this some thought. I appreciate your input!

---

yeah, I chose the smaller text method hahaha. Interchanges with the 4x5 and 5x7 Cascades ;)

Quote:

---

Originally Posted by Larry Gebhardt

Bruce, can you share what the white write on material is that you use for the pocket identification area?

---

Now you are going to test my memory! I had to go back to my design notes to find it. That is polystyrene.

That's excellent to hear.

I've had all three sizes; they're functional and quite nice. I currently have a single 4x5 cascade holder.