Re: Speed Graphic vs MPP??
Quote:
Originally Posted by
Matt_Bigwood
Quote:
Originally Posted by
engl
My first large format camera was a Crown Graphic 4x5. I also do urban photos, you can see some shots I took with the Crown Graphic in this set:
http://www.flickr.com/photos/3616404...7624941511610/
I have now changed to a MPP mk7. In my opinion, the MPP is
way ahead of the crude Crown Graphic. Build quality (all metal), rigidity, "action" feels much better. It offers a lot more in terms of movement, geared rise/shift, more easily used swing/tilt, as well as back movements. The rotating back is a major advantage, adding convenience as well as movement combinations, such as using swing for tilt in both landscape and portrait orientation. Bellows draw is a lot longer, although stability is not very good at full extension. Other details I like is that the viewing hood is easily removed, and it has an accessory shoe.
The one thing I miss from my Crown is that my Fujinon NW-125/5.6 lens folded inside.
My opinion is obviously based on handling only one Crown Graphic and one MPP. I have read that the MPP mk7 is supposedly better built than the mk8, but I have never seen a mk8 so I do not know. Everything I have read suggests that the mk7 or mk8 are the ones to get.
Just seen you photos...very nice
Re: Speed Graphic vs MPP??
Quote:
Originally Posted by
arca andy
Is this true for the whole range of Speed and Crown Graphics? If so then I am certainly leaning towards an MPP...also I live in the bit of London where they were manufactured so may be I should be loyal to an old local brand.
Basically yes, although the super graphic has a switchable back.
As a UK user I you'll find MPPs way more abundant on the second hand market anyway. A crown graphic will be a lit lighter though if mass is a consideration, I did consider one myself but ended up with a lightweight Shenhao instead.
Re: Speed Graphic vs MPP??
The Super Graphic's back rotates, and it has Graflok clips. The Toyo 45AX's back is removed to switch between horizontal and vertical, and it also has Graflok clips.
BTW, Mark, your Mk7 looks absolutely lovely!
Re: Speed Graphic vs MPP??
I used my Crown Graphic with 2 quick release (Arca) plates for vertical and horizontal tripod mounting. With the plates left on, changing orientation was just as quick as with a rotating back. Simpler too.
Re: Speed Graphic vs MPP??
Quote:
Originally Posted by
mandoman7
I used my Crown Graphic with 2 quick release (Arca) plates for vertical and horizontal tripod mounting. With the plates left on, changing orientation was just as quick as with a rotating back. Simpler too.
Hi Mandoman
But once in the portrait orientation can you raise the lens?
Re: Speed Graphic vs MPP??
Quote:
Originally Posted by
arca andy
Hi Mandoman
But once in the portrait orientation can you raise the lens?
The Graphic has about 1/2 inch shift, which would provide slight rise in portrait orientation.
I sometimes use an old Burke and James press camera, which has all metal construction, full front tilt, and a rotating back. The Pacemaker Graphics have other advantages, like fold-down infinity stops and many accessories.
Re: Speed Graphic vs MPP??
MPP & is the way to go, great quality at reasonable prices.
Re: Speed Graphic vs MPP??
MPP 7 is the way forward, great quality at a reasonable price
Re: Speed Graphic vs MPP??
On the MPP I notice that a 90mm lens is mounted on a cone and the railboard is then dropped down, is that because you'ld get the rails in the photo if you didn't drop them down out of site? So would you use a cone on a 75mm lens?
Re: Speed Graphic vs MPP??
Hi Andy
You need to mount a 90mm on a cone so that the front standard is on the short rail inside the body, before the point where the rails hinge. If it was on a flat panel the front standard would be on the front section of the rails outside the body, so you couldn't drop the bed and you''d get the end of it in the picture.
I've never used anything wider than a 90mm but in theory a 75mm would need to be on a cone lens panel.
You can just about see where the rails hinge in this picture: http://www.flickr.com/photos/mattbigwood/5218116109/