Brightness of ground glass
Finally had the time to actually USE my 4x5 camera this afternoon. Indoors as its rather windy out.. I may have over exposed but thats life.
However, with the lens fully open, i was only getting about 1.5" of viewable image on the ground glass, very center. Is this normal, a sign of an issue with the lens or camera itself?
Or do i need to find a replacement ground glass thats rated as being highly visible? Ive seen youtube videos of people taking video images through their ground glass and its like they did it through a window.
Re: Brightness of ground glasss
Lots of factors to determine the issue; What camera? What lens? How extended are your bellows (lens standard to film plane)?
Maybe you have a lens that will just cover 4x5 at typical focal length, but with enough bellows extension, will only cover a 1.5 inch circle.
Maybe it's not even up to covering 4x5 at all.
More information needed!
Re: Brightness of ground glasss
Most GG need dish soap cleaning
Dry it well
Re: Brightness of ground glasss
Quote:
Originally Posted by
monochromeFan
Finally had the time to actually USE my 4x5 camera this afternoon. Indoors as its rather windy out.. I may have over exposed but thats life.
However, with the lens fully open, i was only getting about 1.5" of viewable image on the ground glass, very center. Is this normal, a sign of an issue with the lens or camera itself?
Or do i need to find a replacement ground glass thats rated as being highly visible? Ive seen youtube videos of people taking video images through their ground glass and its like they did it through a window.
Kino is right that we need more information. Kino is mistaken, however, that extending the bellows past infinity focus will reduce the image circle; just the opposite, extending the bellows increases image circle.
On to your 1.5" circle in the very center. It's quite possible that in a low-light situation you are just seeing the "hot spot" that the lens projects on the ground glass, especially if you have a Fresnel lens installed. Or, there could be another problem.
So, before we go further with this, we need to know:
Camera
Lens
Type of ground glass (Fresnel or not, if you can figure that out)
Lighting conditions you were working under
Anything else that might be of import in this situation.
Best,
Doremus
Re: Brightness of ground glasss
hmmm lets see
Omega View 45D
lens my nice wee schnieder tele-xenar 1:5.5 240mm lens
distance between the standards, back of front standard, and front of rear standard, an exact 4".
Was shooting at the kitchen, all lights on, window blinds open.
The negatives have been drying for a while. The entire negative is exposed. Each negative has a spot on each edge where nothing seems to be on it. The stearman 445 leaks heavily.
I made 4 shots. All with aperture at 5.5 a 1 second, a 1/2 second, a 1/5, and lastly 1/10th.
As expected some are better, but i cant put a shutter speed to a negative, things got mixed up with getting them in the tank.
As for getting things focused, i extended the front standard all the way out, and pulled it back until i had an image on the ground glass center and fiddled with the "fine" focus to make it look better.
Re: Brightness of ground glasss
Let's see... There seems to be a 240mm Tele-Xenar telephoto that was designed for the 3 1/4" x 4 1/4" (90x120mm) film format. If that's what you have, it may not cover 4x5 completely; you'll see unexposed corners on the negatives.
If your image was in focus, and there is vignetting of the image (corners unexposed, etc.), then that's likely the problem.
See here: https://www.pacificrimcamera.com/rl/01676/01676.pdf on page 7. The lens was designed for press cameras and probably has pretty tight coverage even on the smaller film format
You can still use the lens and crop the image when enlarging, but you'll likely always get vignetted corners at infinity focus. Working close-up with greater bellows extension will give you greater coverage.
There also seems to be a more modern 240mm Tele-Xenar that covers 4x5 with room to spare. See here: https://www.surpluscameragear.com/sc...ii-lens-board/
Which one does it seem you have?
Best,
Doremus
Re: Brightness of ground glasss
black body, silver rim on the front for a filter to screw into, 6 bladed diaphram. max diameter of silver band is almost 2", and it sticks out from front of shutter about 1 3/8".
the defect on the negative is a completely clear strip on the long edge.. like the film moved in the holder. Asa the image itself on two of them seems to be "canted" to one side.
Re: Brightness of ground glasss
Quote:
Originally Posted by
monochromeFan
black body, silver rim on the front for a filter to screw into, 6 bladed diaphram. max diameter of silver band is almost 2", and it sticks out from front of shutter about 1 3/8".
the defect on the negative is a completely clear strip on the long edge.. like the film moved in the holder. Asa the image itself on two of them seems to be "canted" to one side.
The former seems to indicate that the bellows may have blocked the light, or maybe some other obstructions. The image canted on the film indicates that the film was improperly loaded in the holder, not under both hold-down rails in the holder and fell out diagonally a bit when the darkslide was pulled.
The former should be visible if you remove the back and look at the configuration. The latter you can fix by being sure both sides of the film make it under the rails when loading. Feel with your fingers and pull up on the corners to make sure.
Doremus
Re: Brightness of ground glasss
All is not lost. You can still use the lens on your camera form”macro” work. Rack the front standard out at least 2x the focal length get a ruler and go to town.
in case you are befuddled by how to figure out the exposure here's some reading to get you started https://www.largeformatphotography.i.../t-147740.html
Have fun!
[added later]. you can also expose your film so the image circle is inscribed edge to edge inside the rectangle of your film. some people love circle-images very KODAK ( and religious icon ).
Re: Brightness of ground glass
are you sure the gg is installed and not just a fresnel on it's own?