How would I go about this? Ive never even thought about doing this and then realized that I have a cibachrome tube. I don't have a roller thingy so will I have to constantly roll it?
Thanks
Dave
Printable View
How would I go about this? Ive never even thought about doing this and then realized that I have a cibachrome tube. I don't have a roller thingy so will I have to constantly roll it?
Thanks
Dave
Yes, you will have to roll it by hand, the drum will work but it won't allow the developer to reach the anti halation layer, so you will have to make sure you do the stop bath and fix on a tray.Quote:
Originally Posted by Waldo
Waldo,
Get a Unicolor, Beseler or Omega motorized base off ebay---they go for around $10-$15. Check out Graywolf Phillip's article on the LF Homepage by clicking on the blue banner at the top of this page. He soups four 4x5s in a Unicolor drum but you'll get an idea of how this works.
Hmm, well that kind of defeats the purpose of using the drum for me. Oh well I'll just get trays and process that way anyway.Quote:
Originally Posted by Jorge Gasteazoro
Thank you
Yeah, but if you want a cheap alternative to tubes, you can go to any welding supply store and buy the tubes they use to store the welding leads. They probably wont be light tight and you will have to paint them black to make them so, but it works pretty well, it is what I have in reserve in case my Jobo craps out.Quote:
Originally Posted by Waldo
Drum scanning 8X10 film will cost between $100 and $200 per file, if you can find someone to do it.
You'll also end up with a 500-1000 MB file, which could be problematic to work with.
You might see a difference in prints bigger than maybe 20X24". But, then again you'd have to shoot with an 8X10 camera. Have you ever done this? It's not something to be undertaken lightly.
Figure in as well $5 - $20 per frame in film and processing costs (B&W or colour), the cost of film holders (you'll need more than a few for a day's shooting), and one has to ask – why bother?
If it's something you're already doing, and you understand the issues, then fine. But if not, the image quality advantages have to be weighed against the costs and practical issues.
____________________________________________________________________
business card printing
I'm not going to be scanning the film at that kind of quality just yet. I have a scanner that works just fine for my needs.Quote:
Originally Posted by shengja
I plan to do all the developing myself. I'm prepared to do this.
I was told that as long as I put the film in the tube and do a constant roll that I should be able to do just fine with the tube that I have.
I used to have a cibachrome tube, trust me when I tell you that the developer will not reach the antihaliton layer in the back of the film where it is in contact with the drum.Quote:
Originally Posted by Waldo
Give it a shot, it might work for you, it never worked for me and got a few ruined negatives before I saw the light... :)
J&C sold these welding rod tubes, as film tubes. They are very cheap new on Ebay, a fraction of the J&C price. They are light-tight, but watch out they come in various colours you need Black.Quote:
Originally Posted by Jorge Gasteazoro
I much prefer dish processing 10x8 it's much easier, and quicker.
Ian