View Full Version : Leveling a tripod
I got frustrated to level my G345 tripod. So I ordered a Gitzo leveling base G32 1 from B&H but it was backordered. I've been waiting for 3 weeks patiently but wondering if I shou ld wait more. I would like to hear some experience from a Gitzo leveling base user. I found the panning of a t ripod head above the leveled tripod is essential when I shoot architectural objects. I'm also curious how oth er architectural/landscape LF shooters level a tripod quickly. Here are some ideas that I came up with before I made a decision to G321 <ul> <ol>Use two ballheads or one ballhead and one pan-tilt head on the top <ol>Buy a Bogen panoramic leveling head (adjustable ± 4° as compared to 15° of G321). <ol>Buy a Foba panorama adapter and put it on the top of a tripod head. <ol>Buy a Linhof leveling head or leveling pan-tilt head. </ul>Any comment is appreciated. Masayoshi
Here is how I do it: Arca Swiss B2 on top of Gitzo 410. Tripod has level built i nto the crown, it is reasonable accurate for leveling the tripod. One leg is ext ended along the lens axis, pointing in the direction of the subject. one of the other two legs is manipulated to center the bublle left to right. the forward fa cing leg is adjusted so that the bubble is now centered in the bullseye. Camera is then attached to the B2 head and it is checked and adjusted for being level i n both directions, Since the B2 is actually a a double tilt head with seperate c ontrols for pitch (front to back attitude) and horizontal level this is accompli shed much more swiftly and easily than with a true monoball head design like the Arca Swiss B1 or the Foba. The A/S B-2 is superior ( in my experience) to stand ard pan + double-tilt heads because there is no creeping unlevelness as I had wi th virtually all other pan+tilt designs. The only head I found close to the perf ormance of the A/S B-2 was the pan/single tilt Sinar head, which is designed to work with the Sinar cameras. this head however is unsuited to non Sinar cameras because You cannot level other cameras horizontally.
Bob Salomon - HP Marketing
Well if its any help the Linhof 3/8" thread levelling head is in stock so we can ship it to any dealer today.
[Hi Masayochi, I realize I broke the rule in sending you an answer directly on your E-Mail. So I post it again in the right place]
As far as I can guess, Gitzo sells very few G321 leveling heads and, depending on their stock, it may be difficult to get one in shorts delays. Anyway, I think the stuff is worth waiting. I recently bought one I use mainly with my Hasselblad cameras on a Gitzo Mountaineer G1349 tripod. It is a well designed and sturdy object (despite the finish, a bit rough) and it perfectly fits to the tripod plate. IMHO, as long as you shoot architecture, landscape, portrait or so, it's a better choice than a ballhead since it provides at the same time an accurate mean of leveling the camera and a larger, vibrations- free basis. Before making my mind, I compared the G321 with the Linhof leveling head. The Linhof has a better finish but doesn't fit the Gitzo tripod head (you have to find an adaptation trick by yourself), is harsher to move and has no built-in level. As an alternative, I would recommend the new Hasselblad quick release system equipped with a level, together with its own Arca-Swiss type plate you can screw in the 3/8" or 1/4" socket of your camera. Mounted on a good ballhead (or leveling head), it works fine.
Hope this helps. Girard.
Giotto sells a cheap ballhead with the number 2000 that has two balls and a panoramic function as well. So, by first leveling the bottom ball, the top part is used as a traditional ball head (what I wonder is how one is supposed to know wether the head is leveled in the first place). I think the head is mainly thought to be used in tricky close up situations, but it could work for your purpose.
I haven't seen it in real life, but I have seen pictures of it on the net (for instance on www.becamphoto.se, click on "stativ" on the left). User reports of the Giotto heads seem to indicate that they are quite good heads for the price, with a sacrifice in smoothness.
Finally, I got the leveling base yesterday. The base turns quite smooth. It is enough smoothness for leveling indeed. However, the handle to lock the base is too long to set the tripod at the lowest degree. How important is this? This makes me to think return or exchange to another product. Otherwise, it is nice. So what I'm after is now to buy a ballhead for leveling purpose. The price for G321 or G1321 (the same product) is about $160 so I think I can get a decent ballhead for this purpose.
Powered by vBulletin® Version 4.2.1 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.