Lens board on Toyo 810 / VX125

[ambroz]

Does Toyo 810M uses the same lens board as VX125? 158x158 mm?

Ambroz

[Michael Graves]

That is correct. They also make a 158mm to Linhof adapter so you can use Linhof style boards.

[Per Madsen]

They also make a 158mm to Toyo Field adapter (110 mm * 110 mm) so you can use Toyo Field style boards.

[Neal Chaves]

Perhaps best of all Toyo makes adaptors, both flat and recessed, to fit 4X5 Graphic press lens boards. Some may remember that Toyo reintroduced the 4X5 Super Graphic in the 1980s. Too bad they dropped the ball on that one.

[Robert Hall]

One of my favorite things about these as I use them on my canham 8x10 and 12x20 is I keep a larger board in place and store most of my lenses in the smaller boards so I don't have to have so much room taken up in my pack. I only have a couple lenses that don't fit the 110 square boards.

[Michael Graves]

Perhaps best of all Toyo makes adaptors, both flat and recessed, to fit 4X5 Graphic press lens boards. Some may remember that Toyo reintroduced the 4X5 Super Graphic in the 1980s. Too bad they dropped the ball on that one.

That's true. I should have remembered that as well, since I still have one in my parts drawer at home.

[ambroz]

Thank you guys!