Screen 1030ai Error 1 ?

[David Rowland]

Hi I have a screen 1030 and when attempting to calibrate on start up I get an "error code 1" does anyone know A. what this means and B. how do I fix it.

any help would be gratefully received.

Dave

[Brent Long]

Sorry to hear about your trouble, and that I have no idea of how to help. I have a small opportunity, however, to buy this scanner, and wonder how it has performed for you until now.

Thanks. Hopefully someone helpful will now chime in.

[David Rowland]

Hi Brent

The scanner performs really well and its small enough to fit on a desk/table. If you get one try to make sure you get the software and or a mac to drive it as its OS9 at the latest and scusi etc. I have an old G4 as a stand alone to run it which also has PS6 on it to convert the tiffs outputted from the scanner into something CS5 can use.

But I would recommend it and grab any accessorys you can.

Dave

[vinny]

I own two 1030's but haven't seen that error before. Do u have the manuals? I don't have mine with me. Contact screen in chicago. They still had tech service a couple years ago.

[David Rowland]

Hi Vinny

I'm based in London and have contacted Screen europe the engineer I spoke to said he hadn't seen one of these scanners for 5/6 years and could shed no light on the problem. I noticed that one of the carriage sensor switches wasn't tripping properly so I have removed this and will put in a new one tomorrow and see how I get on.

Cheers Dave

[Peter York]

Have you tried the Yahoo ScanHi-End Group? Someone over there may be able to help.

[David Rowland]

Thanks Peter I have posted a similar plea on there as well but there isn't the traffic that there is here.

Dave

[Brent Long]

Thank you, David.

The scanner comes with a Mac and software, but I'm trying to contact the seller to see if there is a drum in the thing. The pictures only show the scanner, Mac, and software disks, but nary a hint of a drum. I've heard obtaining just a drum can be quite expensive, so it may drive the price too high. So, I'm awaiting his reply, as I am awaiting reply on a Fuji Quattro. Either would do, but I need more info.





Hi Brent

The scanner performs really well and its small enough to fit on a desk/table. If you get one try to make sure you get the software and or a mac to drive it as its OS9 at the latest and scusi etc. I have an old G4 as a stand alone to run it which also has PS6 on it to convert the tiffs outputted from the scanner into something CS5 can use.

But I would recommend it and grab any accessorys you can.

Dave