PDA

View Full Version : Mounting a compur 0 fitted lens onto copal 0 shutter.



Minhhich
14-Jul-2011, 11:15
Hi guys, i was just wondering if i can mount the schneider super angulon 90mm 5.6 (originally fitted on compur 0 shutter) onto a copal 0?

Bob Salomon
14-Jul-2011, 11:20
Yes. But you will need to calibrate and mark the aperture scales as the Compur scales will not fit and you may need shim(s) to adjust the cell spacing.

Minhhich
14-Jul-2011, 15:25
So basically you cannot just fit the front and rear elements of the lens onto the Copal 0 shutter without mod

Bob Salomon
14-Jul-2011, 17:10
So basically you cannot just fit the front and rear elements of the lens onto the Copal 0 shutter without mod

Yes you can. They just screw in. Then you need to do the scales and maybe the shims. A new shutter has unmarked aperture scales.

Minhhich
14-Jul-2011, 18:50
Ah ok, thanks a lot