green b/w negs

[brighamr]

hi

I just developed 4 sheets of adox chs 100 and they came out green where they should be clear/gray
I pre soaked for 1 min then used rodinal 1-25 for 6min then stop for 1 min fix for 5 and then hypo and wash


what am I doing wrong ?
is there anyway of saving these negs

thanks

robin

[DanK]

I'd suggest re-washing first....and possibly increasing the presoak time on future sheets...

If just rewashing doesn't do it, try rewetting then refixing...

Curious as to your wash time?

Thanks,
Dan

[Gem Singer]

Assuming that the negatives were fully fixed after 5 min.in fresh fixer, soak them in a hypo clearing agent such as Permawash, Orbit Bath, etc. for 2-3 min.

Then wash in running water for 20-30 minutes.

Finally, rinse the negatives in a wetting agent bath for a few minutes and hang them to dry.

They should then dry clear.

[Mark Sampson]

Are the green parts transparent? If they are opaque the negs haven't been fixed enough.
Procedure would then be to re-fix in fresh fixer, 2x the clearing time, and finish processing as normal... hypo-clear, wash, rinse, dry.