Rodenstock 480mm APO Ronar Really an f9? Or is it faster...

[Pete Chipman]

Hi, everyone.

I recently acquired a Rodenstock 480mm APO Ronar f/9 barrel lens. I noticed tha t if you turn the aperture past nine, it keeps on getting larger (noticably) bef ore the petals are out of the line of view through the lens, maybe f/8?

So, I guess my question is, what does this mean on a lens? If you go into this aperture area, are you actually getting more speed, or am I just a very wishful, somewhat slow, thinker...

Thanks, Pete.

[Jason Greenberg Motamedi]

Pete,

While I doubt that your Ronar opens much more than f/9 (mine certainly doesn't), the point is really quite moot because focused beyond 1:8 or so process lenses aren't very sharp at wide apertures. This is similar to Schneider's not delimiting f/64 on many of their modern lenses (e.g. the 150mm Symmar-S)--although these lenses can physically stop down to f/64, the effect of defraction is such that they are too soft.

That said, if it is worth the time, please do a test on film, checking to see if indeed it opens wider than f/9, and if the resolution is good--I would love to see the results!

[Pete Chipman]

Will do. Thanks for the response. I figure the camera will be built in another 3 weeks, so I'll be able to post some results at that time.

The petals are really a thing of beauty on the lens. I spent 5 minutes just watching it open and close when I got it..., oh boy...can we say "addiction?"

Pete.

[Bob Salomon]

The barrel mount is used for different lenses. It is not specfic to the lens you have. As the aperture is a ratio of the actual focal length and the opening size the mounts have to be adjusted to the specific optic mounted in it. So the aperture scale usually goes beyond the marked area of a specific lens.

the lens you have came from a process camera and you probably have a filter slot in the mount. Make sure this is closed tight or you will ruin your exposures. You might also investigate having the lens mounted in a shutter.

BTW, the 485mm is an Apo Ronar CL not an Apo Ronar. The 485 was only a CL which means it has a linearized aperture scale. The Apo Ronar series does not..

[Bob Salomon]

Sorry,

I thought you had the 485. The 480mm was available in both CL and non CL versions. The photo version was not CL.

The graphic arts version was available in CL and non CL.

[Bob Salomon]

Also the 480 in Copal 3 is a 9.0 but in Compu or Prontor Prof. 3 it is an f11.

[Paul van der Hoof]

Question for Bob S.

Does the 480 APO Ronar in barrel mount directly into a Copal #3 or does it need to be custom fitted, a la Steve Grimes? Same question for ZEISS APO-TESSAR 450mm or APO-NIKKOR 480, both F9.

TIA

[Bob Salomon]

You would have to check with any camera repairman with the lens in hand. The aperture scale also has to be engraved and the age of the lens may make a difference in the threads.

[Juergen Cullmann]

What is the difference between Apo Ronar 480 and Apo Ronar CL 480? I want to buy a Ronar without CL. What kind is preferable? Can I mount both versions in shutters?

Jürgen ...from Germany

[Bob Salomon]

"difference between Apo Ronar 480 and Apo Ronar CL 480"

The aperture scale.

[Juergen Cullmann]

OK,

I got a 9/485 mm Apo Ronar in ebay Germany for 99 Euros. Do you think the price is okay? The main reason why I bought it: The lens fits in my Compound No 5 shutter. Afriend of mine machined a ring in which I can mount my 210 mm Repromaster an now my new Apo Ronar. I want to use it with my Deardorff 8x10.

Jürgen