View Full Version : Dilution of T-max RS
After receiving several mostly polite tongue lashings last month regarding my la ck of interest in doing my own film and develper testing, my left brain has kick ed back in and I have decided to bite the bullet. I am planning on testing tri- x and t-max 100 with t-max rs developer. I may also do HC-110. HC-110 is regul arly diluted, but I have yet to stumble across anyone who has diluted t-max rs d eveloper. I can figure this out on my own, but don't really want to put the tim e in if some of you have found that diluting t-max rs doesn't work. Have any of you done this exercise and if so, any advise on starting dilutions and times? F or a first shot I thought I would just go one to one on the stock solution and d ouble develping time.
PS Does this thing have a spell checker somewhere ?
I try never to dilute and one-shot everything. Tmax RS is one of my tested developers. You'll notice the times don't allow for much contraction. This is when i change to perceptol. Just Me. Tri-x looks absolutely gorgeous in RS. I expose it from 320 to 200 and tray develope in undiluted RS for a minimum of 5 min. at 68f a good place to start. Large format is worth the waste. Start with one developer and hammer it down then go to HC-110 and test it. Don't chase your tail. Good luck
I use T-Max 100 4x5 film with T-Max RS developer. I regularly use different dilutions depending on whether I want N-2, or N, or etc. type development. I do not mix a stock solution, but instead mix my one-shot working solution straight from the syrup concentrate (which has the RS packet contents poured and mixed into it). For 5x7 tray development @ 24 Celsius (75 Fahrenheit), I use
Development T-Max RS Water Time N-2 (1-19) 50ml 950ml 15m30s N-1 (1-9) 100ml 900ml 9m20s N (1-9) 100ml 900ml 12m40s N+1 (1-9) 100ml 900ml 17m30s N+2 (1-4) 200ml 800ml 12m10s
Hope this helps as a starting point.
I'm going to try the table one more time:
Development T-MaxRS Water Time
N-2 (1-19) 50ml 950ml 15m30s
N-1 (1-9) 100ml 900ml 9m20s
N (1-9) 100ml 900ml 12m40s
N+1 (1-9) 100ml 900ml 17m30s
N+2 (1-4) 200ml 800ml 12m10s
I aggree with Chris Cline's recomendations. Many people complain about T-Max "blocking" which is an incorrect description because it is such a straight line film. The problem is really too much contrast, by diluting you are slowing down the process and making it easier to tame the contrast. Diluting the developer allows for longer development times and also allows larger errors in development although I would suggest trying to be as percise as possible. I could also use a spell checker.
I use T-MAX RS developer almost exclusively for one-shot development in Jobo and tubes. It is wonderful for TMX, TMY, Tri-X and HP-5+. I use it by first mixing in the additive (lots of mixing because the bottled chemistry is syrupy) and then processing from the bottle in either 1:4 or 1:9 with water, depending on the subject brightness range and what I want to end up with. I don't use N + or -, but I can get the equivalent of N-3 to N+2. For real contrasty conditions I switch to that Photographers' Formulary TMX developer. But TEST, get it over with, and then forget it and shoot.
Thank you all for taking the time to help me out. I began testing last weekend and have sent my first batch of negatives out for density readings. Wish me luc k.
Powered by vBulletin® Version 4.2.1 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.