PDA

View Full Version : Emulsion problems?



Ed Richards
22-Jul-2009, 19:59
Two odd problems from the same shoot:

1) negatives from each side of a holder have a 0.5 inch space along the lone side of the negative where there is clear film, as if that edge had been masked.

2) negatives from each side of a holder have identical light streaks going from the bottom (where the film slides in) of the holder nearly to the top, at an angle across the negative. This extends across the boder area covered by the holder, and the streaks are sharp edged and about 1/10 inch wide.

Tmax 100, the rest of the shots are fine. I cannot figure how I could have done either of these by misusing the camera.