jim 76
13-Jan-2009, 09:29
Yup I did it. I was doing (extra) cleaning in side my epson 7600 and when I turned the machine on the printer head carriage went back to far to the right. I got a error message of (00010005). I have a pdf. file of the complete service manual. It tells what may of happened. Dirty this dirty that, to long of a pulse. It tells how to take apart the whole cover of the machine to either put a new motor in or maybe clean.
Is there a way right now to somehow free up the carriage with out taking any covers off? I pressed down on the lever on the cutter housing, but the carriage still won't move. Seems like one end may be off the track or something is stopping it from moving. When I press the lever at the cutting blade the carriage will only move ahead eight of an inch before stopping and hitting against something.
I screwed up by poking a mixture of cleaning fluid with a paper towel under the print head carriage. Must of pushed something there. Man!!!! Please some help. thanks, Jim
Is there a way right now to somehow free up the carriage with out taking any covers off? I pressed down on the lever on the cutter housing, but the carriage still won't move. Seems like one end may be off the track or something is stopping it from moving. When I press the lever at the cutting blade the carriage will only move ahead eight of an inch before stopping and hitting against something.
I screwed up by poking a mixture of cleaning fluid with a paper towel under the print head carriage. Must of pushed something there. Man!!!! Please some help. thanks, Jim