madmandare
29-Aug-2016, 16:01
Hello everyone,
My Canon ipf8000 is printing with faint grey lines across the width of every print.
I've attached an image here of what i mean:
https://s31.postimg.io/66dej8thn/IMG_3382.jpg
https://s9.postimg.org/dbjghr91r/IMG_3380.jpg
I have replaced the Left Printhead (contains black and greys) mutliple times. I have also replaced the Flexible Cable Assembly and the Printhead Relay PCB.
I have also ordered a Carriage Relay PCB and a Linear Scale.
I have done every calibration possible, and these lines just appear on all print.
I thought it might be a head crashing issue, but head height is set to Highest and paper vacuum strangth is set to strongest.
I have also cleans the carriage and the underside of the printheads.
Does anyone have any ideas?
Many Thanks
Max
My Canon ipf8000 is printing with faint grey lines across the width of every print.
I've attached an image here of what i mean:
https://s31.postimg.io/66dej8thn/IMG_3382.jpg
https://s9.postimg.org/dbjghr91r/IMG_3380.jpg
I have replaced the Left Printhead (contains black and greys) mutliple times. I have also replaced the Flexible Cable Assembly and the Printhead Relay PCB.
I have also ordered a Carriage Relay PCB and a Linear Scale.
I have done every calibration possible, and these lines just appear on all print.
I thought it might be a head crashing issue, but head height is set to Highest and paper vacuum strangth is set to strongest.
I have also cleans the carriage and the underside of the printheads.
Does anyone have any ideas?
Many Thanks
Max